MG24435 TELEMECANIQUE, MG24435 Datasheet - Page 6

• Manufacturer Part Number: MG24435
• Description: Circuit Breaker; Mag; Togl; Cur-Rtg 20A; DIN Rail; 1 Pole; 480/277VAC, 60 VDC; C
• Manufacturer: TELEMECANIQUE
• Type: Magneticr

Specifications of MG24435

• Actuator Type: Toggle
• Brand/series: Multi 9™
• Characteristic: C
• Current, Rating: 20 A
• Dimensions: 0.71"Wx3.19"Hx3"D
• Mounting Type: DIN Rail
• Number Of Poles: 1
• Standards: UL Listed
• Termination: Box Lug
• Voltage, Rating: 240, 480Y/277 VAC, 65 VDC
• Small Size — L × W × H, Mm: 81 × 18 (Per Pole) × 75
• Two Trip Curves: C — 7-10 Times Rating; D — 10-14 Times Rating
• Ampere Ratings: From 0.5 to 63 Amps
• Dc Ratings (c-curve Only): 1-Pole — 60 VDC; 2-Pole — 125 VDC

22
Multi 9
Section 2—UL and CSA Rated Protection Devices
© 2002–2008 Schneider Electric All Rights Reserved
System Catalog
UL 1077 Recognized C60 Supplementary Protectors
The UL 1077 products are intended for use as supplementary protectors to provide overcurrent
protection within appliances or electrical equipment where branch circuit protection is already provided
or is not required.
As shown in the table of catalog numbers below, the UL 1077 Recognized products are available in B,
C and D curves. They include devices ranging from 0.5 A to 63 A.
Figure 6:
Table 13:
Standards
•
•
•
•
•
Package Size
Voltage
Connection, Box Lug
UL 486A File No. E90509 Pending
Optional Ring Terminal Kit
Mounting
Time-Current Curves
Degree of Protection as per
IEC 68-2-30
Temperatures
Tropicalization
Number of Operating Cycles:
See Specification Table 3 for dimensions, weights and interrupting ratings
1P
UL 1077 Circuit Breaker, File No. E90509
CSA C22.2 No. 235-M89 File No. 179014
IEC 60947-2
VDE 0660
CE Marked
UL 1077 Recognized C60N Supplementary Protectors
Specifications for UL 1077 Recognized C60 Supplementary Protectors
2P
Nominal Voltage
High Voltage Withstand
Cable: 0.5–25 A: 14–4 AWG (2–25 mm
Cable: 30–63 A: 14–2 AWG (2–35 mm
Screw Dia.: 0.2 in. (5mm)
35 mm DIN rail
B, C, and D Curves
Case
Terminals
Calibration
Storage
Operating
Treatment 2
Electrical (O-C)
0.71 in. (18 mm)
3P
2
2
) Cu Only
) Cu Only
Width per Pole
480Y/277 Vac
6 kV
Torque 22 lb-in (2.49 N•m)
Torque 31 lb-in (3.50 N•m)
Torque 18 lb-in (2.03 N•m)
25°C (77°F)
-40 to 80°C (-40 to 176°F)
-30 to 70°C (-22 to 158°F)
Relative Humidity: 95% at 131°F (55°C)
10,000 at 0.5–63 A
IP40 as per IEC 529
IP20
4P
03/2008