ES195 Chemtronics, ES195 Datasheet - Page 4

• Manufacturer Part Number: ES195
• Description: Flux Remover, Flux-Off No Clean, 1 gal
• Manufacturer: Chemtronics
• Type: Flux Removerr

Specifications of ES195

• Chemical Component: 1, 2-Dichloroethylene/Methanol/Tetrahydrofuran
• Dispensing Method: Aerosol
• Primary Type: Cleaner
• Special Features: No-Clean
• Weight: 1 gal.

ITW CHEMTRONICS
SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Identification
Product Code: ES195
SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name
trans-1,2-dichloroethylene
HCFC-225ca
HCFC-225cb
Tetrahydrofuran
Methanol
SECTION 3: HAZARD IDENTIFICATION
Emergency Overview: Clear, colorless liquid with strong ethereal odor. This product is nonflammable. Liquid may irritate eyes and skin under repeated or prolonged
exposure. Breathing high concentrations of product vapors may produce drowsiness and a headache.
Potential Health Effects:
Eyes:
Skin:
Ingestion: Harmful if swallowed. Irritating to mouth, throat and stomach. May cause vomiting.
Inhalation: Harmful if inhaled. High concentrations of vapors in immediate area can displace oxygen and can cause dizziness, unconsciousness, and even death with
longer exposure. Keep people away from such vapors without self-contained breathing apparatus.
Pre-Existing Medical Conditions Aggravated by Exposure: Lung, skin, eye, gastrointestinal tract, central nervous system.
SECTION 4: FIRST AID
Eyes:
and tested by medical personnel if irritation develops or persists.
Skin: Wash skin with soap and water. Remove contaminated clothing. Get medical attention if irritation develops or persist. Wash clothing separately before reuse.
Ingestion: If swallowed, do not induce vomiting. Keep head below knees to minimize chance of aspirating material into the lungs. Never give anything by mouth to an
unconscious person. Get medical attention immediately.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
SECTION 5: FIRE FIGHTING MEASURES
Flash Point: None (TCC)
Extinguishing media: Use alcohol foam, carbon dioxide, or water spray when fighting fires involving this material.
Fire Fighting Instructions: As in any fire, wear self-contained breathing apparatus (pressure-demand, MSHA/NIOSH approved or equivalent) and full protective gear.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Large Spills: Shut off leak if possible and safe to do so. Wear a self-contained breathing apparatus and appropriate personal protective equipment. Absorb spill with
inert material (e.g. dry sand or earth), then place in a chemical waste container for proper disposal. Do not flush to sewer. Avoid runoff into storm sewers and ditches
which lead to waterways.
Small Spills: Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical waste container for proper disposal.
SECTION 7: HANDLING AND STORAGE
Avoid prolonged or repeated contact with eyes, skin, and clothing. Wash hands before eating. Use with adequate ventilation. Avoid breathing product vapor or mist.
Do not reuse this container. Store in a cool dry place away from heat, sparks or flames. Keep container closed when not in use. Do not store in direct sunlight.
KEEP OUT OF REACH OF CHILDREN.
SECTION 8: EXPOSURE CONTROLS, PERSONAL PROTECTION
Exposure Guidelines:
CHEMICAL NAME
trans-1,2-dichloroethylene
HCFC-225ca/HCFC-225cb
Tetrahydrofuran
Methanol
* Supplier’s Occupational Exposure Limit
Work/Hygienic Practices: Good general ventilation should be sufficient to control airborne levels. Local exhaust ventilation may be necessary to control any air
contaminants to within their TLVs during the use of this product. If vapor concentration exceeds TLV, use NIOSH approved organic vapor cartridge respirator. Wear
safety glasses with side shields (or goggles) and rubber or other chemically resistant gloves when handling this material.
Liquid, aerosols and vapors of this product may be irritating and can cause pain, tearing, reddening and swelling accompanied by a stinging sensation.
Contact may cause skin irritation.
Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Have eyes examined
Product Information: 800-TECH-401
NEW & IMPROVED FLUX-OFF® NO CLEAN (Liquid)
LEL/UEL: Not available
ACGIH TLV
Page 1 of 2
200 ppm
CAS#
156-60-5
422-56-0
507-55-1
109-99-9
67-56-1
200 ppm
not established
50 ppm
not established
OSHA PEL
200 ppm
200 ppm
200 ppm
Wt. % Range
20.0-50.0
10.0-20.0
10.0-20.0
1.0-5.0
1.0-3.0
not established
not established
ACGIH STEL
100 ppm
250 ppm
MSDS #0309L
100 ppm*
OTHER