KDM10-04 SMC Corporation, KDM10-04 Datasheet - Page 2

• Manufacturer Part Number: KDM10-04
• Description: Connector; 10; Nylon, Soft Nylon, Polyurethane; 4 mm; 1 MPa; 1.5 MPa; Blue
• Manufacturer: SMC Corporation

Specifications of KDM10-04

• Color, Button: Blue
• Diameter, Tube: 4 mm
• Length: 114 mm
• Material, Tube: Nylon, Soft Nylon, Polyurethane
• Number Of Connectors: 10
• Pressure, Operating: 1 MPa
• Proof Pressure: 1.5 MPa
• Spacing, Pin: 17 mm
• Temperature, Ambient: -5 to +60 °C
• Weight: 300 g
• Width: 48 mm

Part Numbers
Component Materials
Mixed Sizes of Plug Connectors and Socket Connectors
The rectangular multi-connector permits connector exchange in any desired position, thus allow-
ing use of different sizes of tubes.
Part Numbers
Socket co nnector
No.of connecting
Plug connector
(With packing)
Loosen the cross-recessed head machine
screw using a Phillips screwdriver to
remove the plate from the case.
Connector
Plug case, Socket case
Plate, Bracket
Plug connector,
Socket connector
Clamp bolt, Screw for bracket,
Cross-recessed head machine screw
E type snap ring
tubes
10
20
Tube O.D.
ø3.2
ø3.2
Tube
O.D.
ø3.2
ø3.2
ø4
ø6
ø8
ø4
ø6
ø8
ø4
ø6
ø8
ø4
ø6
ø8
Body
Chuck
Guide
Collet,
Release button
Packing
KDMP-23
KDMP-04
KDMP-06
KDMP-08
KDMS-23
KDMS-04
KDMS-06
KDMS-08
Part No.
KDM10P-23
KDM10P-04
KDM10P-06
KDM10P-08
KDM20P-23
KDM20P-04
KDM20P-06
KDM20P-08
Plug
PBT, C3604BD Electroless nickel plated (ø8)
Part No.
release button
Electroless nickel plated, POM (ø8)
Stainless steel (SUS304), C3604BD
After exchanging connectors in desired
places, fix the plate with a Phillips screw-
driver to the case.
Color of
Blue
Stainless steel (SUS304)
KDM10S-23
KDM10S-04
KDM10S-06
KDM10S-08
KDM20S-23
KDM20S-04
KDM20S-06
KDM20S-08
SWRM, Nickel plated
Polyacetal (POM)
Socket
Polyacetal (POM)
SPCC Plated
SUS304
NBR
release button
Color of
Blue
Multi-connector
Separation
Loosen the clamp bolt to separate the plug
side from the socket side.
Connection
Put together the irregular faces for engage-
ment and connect the plug case to the sock-
et. After tightening the clamp bolt by hand,
tighten it further with allen wrench(nominal
width across flats: 4).
Panel mounting
et side using a Phillips screwdriver (JIS
nominal No.2) until the bracket touches
the stop ring.
Shift the panel mounting bracket to the
inside (Move the screw for bracket in the
longitudinal direction of the slot) and put
the connector in the panel mounting hole.
(Panel mounting hole: See Dimensions.)
side, tighten the bolt with a Phillips screw-
driver to fix the socket case.
bracket touches the stop ring and shift the
bracket to the inside to remove the connec-
tor from the panel.
Loosen (4) screws for bracket on the sock-
After shifting the bolt for bracket to the out-
Loosen the screw for bracket until the
Caution
How to Use
Series
KDM
2.1-70
K„
M„
H„
D„
MS
T„