DP-100NS 200ML 3M, DP-100NS 200ML Datasheet - Page 5

• Manufacturer Part Number: DP-100NS 200ML
• Description: Adhesive; Epoxy; Translucent
• Manufacturer: 3M

Specifications of DP-100NS 200ML

• Chemical Component: Amorphous Silica/Epoxy Resin
• Chemical System: Epoxy
• Color: Translucent
• Dispensing Method: Syringe
• Primary Type: Adhesive
• Time, Drying: Air Dry for 15 minutes, Force Dry for 10 minutes @ 66 °C +⁄- 5 °C (Aluminum Surface), If 3M™ Scotch-Weld™ Structural Primer 1945 B⁄A is Used, Apply a Thin Coating (0.5 mils) on the Metal Surfaces to be Bonded, Air Dry for 10 minutes, then Cure for 30 minu
• Time, Setting: 15 min. (Aluminum), 10 min. (Steel)
• Weight: 200 ml

Material Safety Data Sheet
Copyright, 2007, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.
Product Use:
3.1 EMERGENCY OVERVIEW
Specific Physical Form: Viscous
Odor, Color, Grade: light straw colored, epoxy odor
General Physical Form: Liquid
Immediate health, physical, and environmental hazards:
3.2 POTENTIAL HEALTH EFFECTS
Eye Contact:
Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision.
_________________________________________________________________________________________________
3M MATERIAL SAFETY DATA SHEET Scotch-Weld(TM) Epoxy Adhesive DP-100 NS, Translucent (Part B)
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
SECTION 2: INGREDIENTS
SECTION 3: HAZARDS IDENTIFICATION
Ingredient
EPOXY RESIN
EPOXY RESIN
AMORPHOUS SILICA
MANUFACTURER: 3M
PRODUCT NAME: Scotch-Weld(TM) Epoxy Adhesive DP-100 NS, Translucent (Part B)
Document Group: 11-2401-5
Specific Use:
Intended Use:
DIVISION: Industrial Adhesives and Tapes Division
Base for two part epoxy adhesive
Structural adhesive
-
May cause allergic skin reaction.
C.A.S. No.
25068-38-6
30499-70-8
67762-90-7
% by Wt
80 - 90
7 - 13
3 - 7
Page 1 of 8