DP-100NS 200ML 3M, DP-100NS 200ML Datasheet - Page 8

• Manufacturer Part Number: DP-100NS 200ML
• Description: Adhesive; Epoxy; Translucent
• Manufacturer: 3M

Specifications of DP-100NS 200ML

• Chemical Component: Amorphous Silica/Epoxy Resin
• Chemical System: Epoxy
• Color: Translucent
• Dispensing Method: Syringe
• Primary Type: Adhesive
• Time, Drying: Air Dry for 15 minutes, Force Dry for 10 minutes @ 66 °C +⁄- 5 °C (Aluminum Surface), If 3M™ Scotch-Weld™ Structural Primer 1945 B⁄A is Used, Apply a Thin Coating (0.5 mils) on the Metal Surfaces to be Bonded, Air Dry for 10 minutes, then Cure for 30 minu
• Time, Setting: 15 min. (Aluminum), 10 min. (Steel)
• Weight: 200 ml

Stability: Stable.
Materials and Conditions to Avoid: Strong acids; Strong oxidizing agents; Heat is generated during cure. Do not cure a mass larger
than 50 grams in a confined space to prevent a premature reaction (exothem) with production of intense heat and smoke.
Hazardous Polymerization: Hazardous polymerization will not occur.
ECOTOXICOLOGICAL INFORMATION
Not determined.
CHEMICAL FATE INFORMATION
Not determined.
Waste Disposal Method: Dispose of completely cured (or polymerized) wastes in a sanitary landfill.
As a disposal alternative, incinerate uncured product in an industrial or commercial incinerator in the presence of a combustible
material.
EPA Hazardous Waste Number (RCRA): Not regulated
_________________________________________________________________________________________________
3M MATERIAL SAFETY DATA SHEET Scotch-Weld(TM) Epoxy Adhesive DP-100 NS, Translucent (Part B)
SECTION 12: ECOLOGICAL INFORMATION
SECTION 13: DISPOSAL CONSIDERATIONS
SECTION 14:TRANSPORT INFORMATION
SECTION 10: STABILITY AND REACTIVITY
SECTION 11: TOXICOLOGICAL INFORMATION
Viscosity
Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its
components.
Since regulations vary, consult applicable regulations or authorities before disposal.
Substance
Aldehydes
Carbon monoxide
Carbon dioxide
Ketones
Hazardous Decomposition or By-Products
Condition
During Combustion
During Combustion
During Combustion
During Combustion
90000 - 150000 centipoise
Page 5 of 8