ELCSOFTGP Eaton / Control Automation, ELCSOFTGP Datasheet - Page 39

• Manufacturer Part Number: ELCSOFTGP
• Description: ACCESSORY; ELC PROGRAMMING SOFTWARE FOR ELC GRAPHICS PANELS
• Manufacturer: Eaton / Control Automation

■
There are two types for you to choose:
Indicator: Choose Object (O) > Indicator(16x16) > Indicator or click the button
Step 7. The digital numbers of integer and decimal according to the setting of display
Step 8. The settings of frame could be no frame, double-line frame, bold frame and the
Step 9.You could choose to fill 0 in upper bit or not. For example, there are 6 integer
Step 10. After setting, GP will read ELC corresponding reference device to show the value
Step 11. Choose View (V) > Object Inspector: display all properties of objects and it also
Indicator(16x16)
value number. For example, if the real value of timer T0 is 50 seconds, if you set
integer number is 3 and decimal number is 0 and it will display 500. If you set 3
for integer number and 1 for decimal number and it will display 050.0.
font size could be 5X8, 8X8, 8X12 and 8X16.
numbers and 2 decimal numbers of a value. If you check to fill 0, the value
324836 will display to 003248.36. If you don’t check to fill 0, the value 324836 will
display to 3248.36.
on GP screen.
can be edited and set directly.
When GP reads the ELC corresponding contacts (ON or OFF), it will show the
corresponding figure.
1-33
to set.