ELCSOFTGP Eaton / Control Automation, ELCSOFTGP Datasheet - Page 52

• Manufacturer Part Number: ELCSOFTGP
• Description: ACCESSORY; ELC PROGRAMMING SOFTWARE FOR ELC GRAPHICS PANELS
• Manufacturer: Eaton / Control Automation

Constant: Pressing this button and GP will send the constant setting to ELC
Increase/Decrease: Pressing this button and GP will read register data from ELC and add
Step 1. The setting steps are the same as ON/OFF button. There are some setting
Step 2. The value length could be set to 16 bits or 32 bits. Value type could be unsigned ,
Step 3. If you set 3 for integer number and 2 for decimal number, the whole number will
Step 4. After finishing input, press OK to enter and the button will be used by the
items are different in the dialog box.
signed, hexadecimal and BCD.
be displayed as 000.00. If you set 5000 for the maximum value, the maximum
you could input is 050.00 due to there are 2 decimals. If you set 500 for the
maximum value, the maximum you could input is 5.00.
function you set.
corresponding register.
or submit according to the settings. It will write the result to ELC
corresponding register. If you set 10 for inc/dec and 1000 for
up/down bound, it means it will increase/decrease 10 for each time
you press the button. And the maximum you can increase/decrease
is 1000.
1-46