DP-110-GRAY-200ML 3M, DP-110-GRAY-200ML Datasheet - Page 5

• Manufacturer Part Number: DP-110-GRAY-200ML
• Description: Adhesive; Epoxy; Gray; Duo-Pak; 200 mL Tube
• Manufacturer: 3M

Specifications of DP-110-GRAY-200ML

• Chemical Component: Butadiene/Epoxy Resin/Hydrogenated Polyphenyls/Hydrogenated Terphenyl/Methacrylate/Styrene Polymer
• Chemical System: Epoxy
• Color: Gray
• Dispensing Method: Syringe
• Primary Type: Adhesive
• Time, Drying: Air Dry for 15 minutes, Force Dry for 10 minutes @ 66 °C +⁄- 23 °C (Aluminum Surface), If 3M™ Scotch-Weld™ Structural Adhesive Primer EC1945 B⁄A is Used, Apply a Thin Coating (0.5 mils) on the Metal Surfaces to be Bonded, Air Dry for 60 minutes, then Cure
• Time, Setting: 15 min. (Aluminum), 60 min. (Steel)
• Weight: 200 ml

Scotch-Weld
Epoxy Adhesives
DP110 Translucent and Gray
3
Industrial Business
Industrial Adhesives and Tapes Division
Storage
Shelf Life
Precautionary
Information
For Additional
Information
Product Use
Warranty and
Limited Remedy
Limitation of Liability
TM
Store products at 60-80°F (16-27°C) for maximum storage life.
3M™ Scotch-Weld™ Epoxy Adhesive DP110 Translucent and Gray have a shelf
life of 15 months in their unopened containers. Duo-pak cartridges have a shelf life
of two years in their unopened bulk containers.
Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the
3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory
asserted, including warranty, contract, negligence or strict liability.
Refer to Product Label and Material Safety Data Sheet for health and safety information before using this
product. For additional health and safety information, call 1-800-364-3577 or [phone].
To request additional product information or to arrange for sales assistance, call toll free 1-800-362-3550
or visit www.3M.com/adhesives. Address correspondence to:
Building 21-1W-10, 900 Bush Avenue, St. Paul, MN 55144-1000. Our fax number is 651-778-4244. In
Canada, phone: [phone]. In Puerto Rico, phone: [phone]. In Mexico, phone: [phone].
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards.
All statements, technical information and recommendations contained in this document are based upon
tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect
the use and performance of a 3M product in a particular application, including the conditions under
which the product is used and the time and environmental conditions in which the product is expected to
perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the
user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the
user’s method of application.
Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual
products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the
product. Individual products may have additional or different warranties as stated on product literature,
package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF
DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product
is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within the
warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to
replace the product or refund the purchase price.
- 7 -
ISO 9001
3
M Industrial Adhesives and Tapes Division,