DP110-TRANSLUCENT-400ML 3M, DP110-TRANSLUCENT-400ML Datasheet - Page 2

• Manufacturer Part Number: DP110-TRANSLUCENT-400ML
• Description: Chemicals 400ML EXPOXY TRANSLUCENT
• Manufacturer: 3M

Specifications of DP110-TRANSLUCENT-400ML

• Product: Adhesives
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 02120087847 62356335307 DP110

3M
Epoxy Adhesives
DP110 Translucent and Gray
Typical Cured
Electrical Properties
Typical Adhesive
Performance
Characteristics
Typical Cured
Thermal Properties
™
Scotch-Weld
Note: The following technical information and data should be considered representative
The following product performance data was obtained in the 3M laboratory under
the conditions specified. The following data show typical results obtained with
Scotch-Weld epoxy adhesive DP110 Translucent and Gray when applied to
properly prepared substrates and cured for 48 hours at 73°F (23°C) under 2 psi
pressure and tested according to the specifications indicated.
Note: All data developed after a 48 hour cure @ 75°F (24°C) under 2 psi pressure
A. Aluminum Overlap Shear
Note: The following technical information and data should be considered representative
Note: The following technical information and data should be considered representative
Product
Dielectric Strength (volts/mil)
Volume Resistivity (ohms - cm)
Product
Thermal Conductivity
BTU/Hr/Ft
Thermal Coefficient of Expansion
Glass Transition Temp.
Overlap shear shear strength was measured on FPL etched 1 in. wide by 1/2 in.
overlap specimens. The bonds were made from 2 panels of 4 in. x 7 in. x .063 in.,
2024 T3 clad aluminum bonded together and cut into 1 in. wide specimens. The
separation rate of the testing jaws was .1 in./minute. Tests similar to ASTM D-1002.
™
or typical only and should not be used for specification purposes.
or typical only and should not be used for specification purposes.
or typical only and should not be used for specification purposes.
160°F (71°C)
180°F (82°C)
unless noted otherwise.
-67°F (-55°C)
Test Temp
75°F (24°C)
-58°F (-50°C) - 32°F (0°C)
-58°F (-50°C) - 166°F (110°C)
2
/°F/Ft.
- 2 -
DP110 Translucent
Epoxy Adhesive
Scotch-Weld
2500 psi
2500 psi
270 psi
200 psi
3M™ Scotch-Weld™
.106 @ 113°F (45°C)
DP110 Translucent
DP110 Translucent
Epoxy Adhesive
Epoxy Adhesive
Scotch-Weld
55°F (13°C)
200 x 10
4.5 x 10
80 x 10
520
-6
10
-6
Epoxy Adhesive
Scotch-Weld
3M™ Scotch-Weld™
DP110 Gray
.104 @ 113°F (45°C)
Epoxy Adhesive
Epoxy Adhesive
2700 psi
3500 psi
270 psi
250 psi
Scotch-Weld
DP110 Gray
DP110 Gray
61°F (16°C)
165 x 10
6.9 x 10
73 x 10
470
-6
10
-6