DP110-TRANSLUCENT-400ML 3M, DP110-TRANSLUCENT-400ML Datasheet - Page 4

• Manufacturer Part Number: DP110-TRANSLUCENT-400ML
• Description: Chemicals 400ML EXPOXY TRANSLUCENT
• Manufacturer: 3M

Specifications of DP110-TRANSLUCENT-400ML

• Product: Adhesives
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 02120087847 62356335307 DP110

Scotch-Weld
Epoxy Adhesives
DP110 Translucent and Gray
3M™ EPX™
Pneumatic Applicator
Delivery Rates
Environmental
Resistance
TM
400 ml Applicator – Maximum Pressure 73 psi
200 ml Applicator – Maximum Pressure 58 psi
50 ml Applicator – Maximum Pressure 50 psi
Note: The following technical information and data should be considered representative
Overlap shear specimens were prepared on aluminum as above and exposed to the
environment conditions described below.
**Did not mix adequately.
Note: Avoid using either Scotch-Weld epoxy adhesive DP110 Translucent or Gray on metals
*Tests were run at a temperature of 70°F ± 2°F (21°C ± 1°C) and at maximum applicator pressure.
Adhesive*
Scotch-Weld epoxy adhesive DP110 Gray
Scotch-Weld epoxy adhesive DP110 Gray 100°F (38°C)
Scotch-Weld epoxy adhesive DP110 Gray
Scotch-Weld epoxy adhesive DP110 Gray 100°F (38°C)
Scotch-Weld epoxy adhesive DP110 Gray 125°F (49°C)
Scotch-Weld epoxy adhesive DP110 Gray 150°F (66°C)
Adhesive*
Scotch-Weld epoxy adhesive DP110 Translucent
Scotch-Weld epoxy adhesive DP110 Gray
Initial
30 days tap water @ 75°F (24°C)
3 days, 160°F (71°C), 100% rel. humidity
14 days in 5% salt spray @ 95°F (35°C)
where the bonded parts will experience high humidity/hot water conditions. User must test
thoroughly adhesive performance for any environments which will be encountered.
or typical only and should not be used for specification purposes.
Environment
- 4 -
3M™ Scotch-Weld™
DP110 Translucent
Etched
Epoxy Adhesive
2500
2300
1200
500
Overlap Shear (psi) @ 75°F (24°C)
6.3
6.2 (nozzle cut back 2 divisions)
12.3
12.1 (nozzle cut back 2 divisions)
Abraded
1000
1250
6mm Nozzle
gms/minute
700
150
332.0
14.0
35.1
53.8
1/4 in. Nozzle
8.3
6.6
gms/minute
3M™ Scotch-Weld™
Etched
Epoxy Adhesive
2500
2300
1200
500
DP110 Gray
10mm Nozzle
gms/minute
687.0**
115.9
129.6
31.5
50.3
25.6
Abraded
2300
1250
700
150