11-4945-225-00 3M, 11-4945-225-00 Datasheet - Page 22

• Manufacturer Part Number: 11-4945-225-00
• Description: LCD Touch Panels 17 C1700SS USB, No Bezel
• Manufacturer: 3M
• Series: C1700SSr
• Type: Capacitiver

Specifications of 11-4945-225-00

• Length: 13" (337.9mm)
• Width: 16" (405mm)
• Height: 10.6" (270.3mm)
• Interface: USB
• Diagonal Screen Size: 17" (433mm)
• Lead Free Status / Rohs Status: Details

22
Display Installation Problems
No image displayed
(blank screen)
Abnormal image
Colors of image are
abnormal
Disturbances on the
screen
Is the display receiving power?
• Check that the computer’s power cable is connected properly and securely into a
• Check that the AC/DC power supply is firmly plugged into the display. Check
• Check that the display’s power cable is connected properly and securely to an
• Try using another power cable.
• Try using another electrical outlet.
Is the display receiving a valid video signal from the PC?
• Check that the computer is powered on.
• Check that the video cable is connected properly and securely to the display and
• Check that the LED on the rear of the unit is green.
• Check that no pins are bent in the video cable connector.
• Check that the video card is firmly seated in the card slot in your computer.
• Check that the video input from the video card falls within the refresh rate of the
• Check that your computer is using a supported display mode. Refer to Table 1
Is the display in Power Management mode?
• If the LED on the rear of the display is flashing orange/red, touch the sensor,
Are the brightness and contrast settings too low?
• Use the display controls to adjust these values.
• Check that the video input from the video card falls within the refresh rate of the
• Check that the video cable is connected properly and securely to the display and
• Check that the video cable is connected properly and securely to the display and
• Check that no pins are bent in the video cable connector.
• The video display adjustments are incorrect. Refer to Chapter 4 for adjusting
grounded electrical outlet.
that the LED is showing green on the AC/DC power supply.
electrical outlet.
the computer.
display. Refer to Table 1 for details.
for details.
press any key on the keyboard, or move the mouse to restore operation.
display. Refer to Table 1 for details.
the computer.
the computer.
procedures.
3M Touch Systems Proprietary Information
3M™ MicroTouch™ Display C1700SS Installation Guide