3601-95B-40 IEE (INDUSTRIAL ELECTRONIC ENGINEERS), 3601-95B-40 Datasheet - Page 20

• Manufacturer Part Number: 3601-95B-40
• Description: Vacuum Fluorescent Display Panel
• Manufacturer: IEE (INDUSTRIAL ELECTRONIC ENGINEERS)

Specifications of 3601-95B-40

• Resolution: 2 X 20
• Character Format: Dot Matrix
• Viewing Area (h X W): 17.67mm X 93.8mm
• Supply Current: 370mA
• Interface Type: Serial, Parallel
• Operating Temperature Range: 0°C To +55°C
• Rohs Compliant: Yes

04/10/02
3.2.3
3.2.4
Industrial Electronic Engineers, Inc.
Van Nuys, California
Personality Interface (Continued)
Jumper positions are shown above for LCD mode. Filled positions are settings without Interface Converter.
Baud rate jumper must be moved to 1200 (hatched) position if an Interface Converter is installed.
Power/Data Connector
The Power/Data connector (J1) contact arrangement is shown in the illustration below. See Table 3–4 for
pin assignments.
The 36X2-134 model has a separate power connector J2 and the pin assignments are:
IEE recommends that the user install a keying plug in the mating connector at
the Pin 8 location. This will assure that the mating connector is always
installed correctly and will avoid damage to the display.
9600
2
1
1200
IEE supplied accessory connectors are properly keyed.
19200
Personality Jumper Positions
J1 Contact Arrangement
J2-1
J2-2
J2-3
J2-4
J2-5
J2-6
INTEL
Figure 3–10
Figure 3–11
SCALE
SIZE
+5VDC
NC
NC
COMMON (GND)
NC
NC
NOTE
A
MOT
CODE IDENT NO.
Pin 8 Removed for Keying
N/A
LCD
05464
REV
N
NORM
20
19
SFTST
SHEET
S036X2–XXX–XXXXX
19 of 49