STM32F103ZFH6 STMicroelectronics, STM32F103ZFH6 Datasheet - Page 84

• Manufacturer Part Number: STM32F103ZFH6
• Description: 16/32-BITS MICROS
• Manufacturer: STMicroelectronics
• Series: STM32r

Specifications of STM32F103ZFH6

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 72MHz
• Connectivity: CAN, I²C, IrDA, LIN, SPI, UART/USART, USB
• Peripherals: DMA, Motor Control PWM, PDR, POR, PVD, PWM, Temp Sensor, WDT
• Number Of I /o: 112
• Program Memory Size: 768KB (768K x 8)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 96K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 21x12b; D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LFQFP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Electrical characteristics
5.3.13
84/120
Static latch-up
Two complementary static tests are required on six parts to assess the latch-up
performance:
●
●
These tests are compliant with EIA/JESD 78A IC latch-up standard.
Table 44.
I/O current injection characteristics
As a general rule, current injection to the I/O pins, due to external voltage below V
above V
operation. However, in order to give an indication of the robustness of the microcontroller in
cases when abnormal injection accidentally happens, susceptibility tests are performed on a
sample basis during device characterization.
Functional susceptibilty to I/O current injection
While a simple application is executed on the device, the device is stressed by injecting
current into the I/O pins programmed in floating input mode. While current is injected into the
I/O pin, one at a time, the device is checked for functional failures.
The failure is indicated by an out of range parameter: ADC error above a certain limit (>5
LSB TUE), out of spec current injection on adjacent pins or other functional failure (for
example reset, oscillator frequency deviation).
The test results are given in
Table 45.
I
INJ
Symbol
Symbol
LU
A supply overvoltage is applied to each power supply pin
A current injection is applied to each input, output and configurable I/O pin
DD
(for standard, 3 V-capable I/O pins) should be avoided during normal product
Static latch-up class
Electrical sensitivities
I/O current injection susceptibility
Injected current on OSC_IN32,
OSC_OUT32, PA4, PA5, PC13
Injected current on all FT pins
Injected current on any other pin
Parameter
Description
Table 45
Doc ID 16554 Rev 2
T
A
+105 °C conforming to JESD78A
Conditions
Functional susceptibility
Negative
injection
-5
-0
-5
STM32F103xF, STM32F103xG
injection
Positive
+0
+0
+5
II level A
Class
SS
Unit
mA
or