C0510X6S0G224M TDK Corporation, C0510X6S0G224M Datasheet - Page 12

• Manufacturer Part Number: C0510X6S0G224M
• Description: CAP CER .22UF 4.0V X6S 20% 0204
• Manufacturer: TDK Corporation
• Series: Cr

Specifications of C0510X6S0G224M

• Capacitance: 0.22µF
• Voltage - Rated: 4V
• Tolerance: ±20%
• Temperature Coefficient: X6S
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 105°C
• Applications: Bypass, Decoupling
• Ratings: -
• Package / Case: 0402 (1005 Metric) Wide, 0204 (0510 Metric)
• Size / Dimension: 0.020" L x 0.039" W (0.52mm x 1.00mm)
• Height: -
• Thickness: 0.014" (0.35mm)
• Lead Spacing: -
• Features: Low ESL (Reverse Geometry)
• Lead Style: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 445-7075-2

TDK MLCC US Catalog
No.
14
15
*As for the initial measurement of capacitors on number 6, 10, 11, 12 and 13, leave capacitor at 150 -10, 0°C for 1h and
measure the value after leaving capacitor for 24 ± 2h in ambient condition.
General
Specifications
Item
Moisture Resistance
External
appearance
Capacitance
D.F. (Class 2)
Insulation
Resistance
Life
External
appearance
Capacitance
D.F. (Class 2)
Insulation
Resistance
Performance
No mechanical damage.
Characteristics
X7R: 200% of initial spec. max.
X7S: 200% of initial spec. max.
X5R: 200% of initial spec. max.
X6S: 200% of initial spec. max.
500MΩ or 25MΩ•μF min. (whichever
smaller). As for the capacitor of rated
voltage 16, 10, 6.3 and 4V DC, 5MΩ•μF
min.
No mechanical damage.
Characteristics
X7R: 200% of initial spec. max.
X7S: 200% of initial spec. max.
X5R: 200% of initial spec. max.
X6S: 200% of initial spec. max.
1,000MΩ or 50MΩ•μF min. whichever
smaller. As for the capacitor of rated
voltage 16, 10, 6.3 and 4V DC,
10MΩ•μF min.
Characteristics
Class 2
Characteristics
Class 2
X7R
X7S
X5R
X6S
X7R
X7S
X5R
X6S
Change from the
value before test
± 12.5 %
Change from the
value before test
± 15 %
Page 206
C Series – Low ESL Flip Type
Test or Inspection Method
Solder the capacitors on P.C. board (shown in
Appendix 1) before testing.
Apply the rated voltage at temperature 40 ± 2ºC and
90 to 95%RH for 500 +24, 0h.
Charge/discharge current shall not exceed 50mA.
Leave the capacitor in ambient conditions for 48 ± 4h
before measurement.
Voltage conditioning:
Voltage treats the capacitor under testing temperature
and voltage for 1hour.
Leave the capacitor in ambient conditions for 24 ± 2h
before measurement.
Use this measurement for initial value.
Reflow Solder the capacitor on P.C. board (shown in
Appendix 1) before testing.
Apply rated voltage at maximum operating temperature
± 2ºC for 1,000 +48, 0h.
Charge/discharge current shall not exceed 50mA.
Leave the capacitor in ambient conditions for 24 ± 2h
before measurement.
Voltage conditioning:
Voltage treats the capacitor under testing temperature
and voltage for 1hour.
Leave the capacitor in ambient conditions for 48 ± 4h
before measurement.
Use this measurement for initial value.
Version B11