CJ1W-PA202 Omron, CJ1W-PA202 Datasheet - Page 6
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
CJ1W-PA202
Manufacturer Part Number
CJ1W-PA202
Description
POWER SUPPLY 100-240VAC
Manufacturer
Omron
Datasheet
1.CJ1W-PA202.pdf
(12 pages)
Specifications of CJ1W-PA202
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
CJ1W-PA202
CJ1WPA202
Z3157
CJ1WPA202
Z3157
AC Input
Supply 100 to 240 V AC (allowable: 85 to 264 V AC). (Voltage selection is not required.)
DC Input
Supply 24 V DC.
LG
Ground to a resistance of 100 Ω or less to increase noise resistance and avoid electric shock.
GR
Ground to a resistance of 100 Ω or less to avoid electric shock.
RUN Output (CJ1W-PA205R Only)
The internal contact turns ON when the CPU Unit is operating (RUN or MONITOR mode). The Power Supply Unit must be in the CPU Rack to use
this output.
Alarm Output (CJ1W-PA205C Only)
The alarm output is used to notify when Power Supply Unit replacement is required. The output is normally ON. The output turns OFF when the
time until replacement is 6 months or less.
Wiring
Wire
For AC/DC power supply
For grounding wire
For alarm output
CJ1W-PD025
CJ1W-PD022
Recommended wire size
Recommended wire size
AWG 22 to 18
(0.32 to 0.82 mm
AWG 28 to 24
(0.08 to 0.2 mm
Recommended wire size
2
)
2
)
Model
AWG14 to 20
(0.517 to 2.08mm
2 mm
Connecting to PLC terminal block models
Connecting to PLC connector models
2
min.
19.2 to 28.8 VDC (±20%)
21.6 to 26.4 VDC (±10%)
2
Use
)
Allowable power supply voltage
fluctuation range
30 N max.
(clamping operation)
Pushing strength
30 N min.
10 N min.
Pulling strength
(holding force)
CJ1W-PA/PD
7 to 10 mm
Length of stripped
section
6