XW2Z-200J-B13 Omron, XW2Z-200J-B13 Datasheet - Page 9
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
XW2Z-200J-B13
Manufacturer Part Number
XW2Z-200J-B13
Description
SERVO RELAY UNIT CABLES 2M
Manufacturer
Omron
Datasheet
1.XW2Z-200J-B13.pdf
(16 pages)
Specifications of XW2Z-200J-B13
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
XW2Z200JB13
16
Serial Communications with the Host PLC
By mounting a Serial Communications Unit (of Unit version 1.2
or later) to a CS/CJ-series PLC, accessed data can be read and
written for the FQM1 using the SEND/RECV network
communications instructions with the CS/CJ-series PLC as the
Host Link master and the FQM1 as the Host Link slave (using
the RS-232C port on the Coordinator Module).
FQM1 data can be read and written using
communications instructions from the host PLC.
Equipped with Host Link Functions as
Standard Feature: Coordinator Module
Serial communications systems can be constructed with
the host PC.
Connecting Peripherals
SEND/
RECV
instructions
Host Links with CS/CJ-series PLCs
Serial PLC Links with CJ1M PLCs
CS/CJ-series PLC
Coordinator
Module
FQM1
RS-232C port
Serial communications
serial gateway (conversion
from FINS to Host Link FINS)
Serial Communications
Unit
Host Link master
Host Link
slave
•CJ1M:FQM1 = 1:1 Connection
Data-sharing
FQM1 (slave)
•CJ1M:FQM1 = 1:N (8 Max.) Connection
CJ1M CPU Unit (master)
Data
sharing
Reference information: In the complete link method, the CJ1M CPU Unit
Exchange of control data with the machine's main controller
(PLC) can be performed without any special programming.
With the CJ1M CPU Unit as master and the FQM1 as slave,
data can be exchanged between the two without special
programming. Connect the FQM1 Coordinator Module to the
RS-232C port.
Note 1: The master link method and complete link method for Serial PLC Links are
The maximum size of each CJ1M/FQM1 transmission is ten
words. Transmissions smaller than ten words (unified
CJ1M/FQM1 size) can also be sent (set as the number of link
words).
CJ1M CPU Unit (master)
Seamless Data Exchange with
Host Controllers
System Configuration
FQM1
(slave)
Serial PLC Links Supported
(Data Sharing with the OMRON CJ1M PLC)
2: When connecting 1:N (where N = 8 units max.) via RS-422A/485, use an
supported.
RS-422A converter (CJ1W-CIF11).
RS-232C
Coordinator
Module
CJ1W-CIF11 (RS-422A/485 to RS-232C conversion):
connecting to an RS-232C port
Coordinator Module
will be the master and data transfer will be
possible among the FQM1 slaves.
CJ1W-CIF11
(RS-422A/485 to RS-232C conversion):
Connection to an RS-232C port
FQM1
(slave)
8 Units max.
RS-422A/485
FQM1
(slave)
Serial Communications with
NS-series PTs
Servo parameters and other data can be read or written from
an NS-series PT or computer (application running on the
CX-Server) via the FQM1 Coordinator Module for servo drivers
connected by RS-422A. This makes it easy to enter servo driver
parameter settings at system startup, and to monitor operation.
OMRON W-series or SMARTSTEP
Example: Accessing a Servo Driver (W-series or SMARTSTEP) Using
Note: The Servo Relay Unit has a built-in RS-422A connector for
RS-422A-compatible Servo Drivers
System Configuration
Easy Servo Parameter Setup/Monitoring
from NS-series PTs
Serial Gateway Function
(Built-in RS-422A for Connecting to Servo)
connecting to the FQM1.
Connecting Peripherals
Construct Touch Panel (PT) Systems and DeviceNet Systems.
NS-series PTs supported.
DeviceNet supported.
Smart Active Parts on an NS-series PT Connected Using an NT
Link
NT Link
Coordinator
Module
NS-series PT
Smart Active Parts
RS-422A
Servo parameters, etc.
Servo
(W-series or
SMARTSTEP)
Protocol change
Servo Relay
Unit
RS-422A
FQM1
RS-422A
Servo
(W-series or
SMARTSTEP)
Servo Relay
Unit
DeviceNet communications with
the host controller
Remote I/O communications will be possible between the host
controller (master) and FQM1 (slave) if the FQM1 is expanded
using an I/O Control Module and the slave function of a
CJ-series DeviceNet Unit.
Data can be exchanged with the host controller
using DeviceNet without special programming.
Add a DeviceNet Slave Function
FQM1 (slave)
Remote I/O communications
I/O Control Module
DeviceNet network
Host controller (master)
CJ-series
DeviceNet Unit
(slave function only)
17