NS12-ATT01 Omron, NS12-ATT01 Datasheet - Page 205
NS12-ATT01
Manufacturer Part Number
NS12-ATT01
Description
NT625C/NT631/NT631C TO NS10
Manufacturer
Omron
Datasheet
1.NS12-TS01B-V2.pdf
(334 pages)
Specifications of NS12-ATT01
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
NS12ATT01
- Current page: 205 of 334
- Download datasheet (7Mb)
6-3-14 Starting the Ladder Monitor from Alarm/Event Summary and His-
6-3-15 Setting the Tag Update Notification Message
6-3-16 Time to Switch to System Menu (NS12, NS10, NS8, or NS5)
tory (NS15/12/10/8 Only)
2. After completing the setting, press the Write Button. The setting will be saved.
You can start the Ladder Monitor if an alarm or event is selected in the Alarm/Event Sum-
mary and History.
If ON is selected, a message to confirm whether to start the Ladder Monitor will be displayed
when an alarm or event is selected in the Alarm/Event Summary and History.
1.
2. After completing the setting, press the Write Button. The setting will be saved.
If tags are used by projects in the NS-series PT, tags will be automatically verified when lad-
der data is downloaded to the host. Set whether to display a confirmation message before
the system starts to verify the tags.
Make the setting on the PT Operation Tab Page in the System Menu.
1.
With a NS12, NS10, NS8, or NS5 PT, the time required to switch to the System Menu when
two of the four screen corners are pressed can be set. A longer time can be set to help pre-
vent unintentional access to the System Menu.
The time to switch to the System Menu can be set to between 0 and 5 s.
Set the time using the following procedure from the PT Settings Tab Page in the System
Reference
Reference
tory.
Select either ON or OFF for starting Ladder Monitor from alarm/event summary and his-
Select either Display or Hide for the tag update notification message setting.
• Refer to the NS-series PT Programming Manual for information on the alarm/event
• With Ladder Monitor version 3.0 or higher, the system will automatically search for the
• Refer to 6-11 Verifying Tags for information on verifying tags.
•
summary and history.
communications address of the selected alarm or event when the Ladder Monitor
starts.
Tags can be used when connection is made to a CJ2H-CPU
EtherNet/IP.
@@
-EIP PLC using
6-3 PT Settings
6-31