NS12-ATT01 Omron, NS12-ATT01 Datasheet - Page 96

• Manufacturer Part Number: NS12-ATT01
• Description: NT625C/NT631/NT631C TO NS10
• Manufacturer: Omron

Specifications of NS12-ATT01

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: NS12ATT01

3-7 Installing the Video Input Unit
3-42
If the picture displayed on the PT screen is too bright or dark, contrast adjustment is required.
Contrast adjustment is usually performed using one of the following procedures.
• Select Video Configuration from the Special Screen Tab Page in the System Menu. (Refer
• Select the Contrast Adjustment function for Command Buttons. (Refer to Command But-
If the contrast is not improved using the above methods, change the contrast with the Video
Board’s contrast adjustor using the following method.
Turn the contrast adjustor gradually using a small screwdriver while checking the picture dis-
played on the PT screen.
If turning the contrast adjustor too much, the image may be distorted. Turn the contrast ad-
justor in the opposite direction to remove the noise.
to Video Configuration under 2-20 Special Functions in the NS-series Programmable Ter-
minals Programming Manual.)
tons under 2-9 Buttons in the NS-series Programmable Terminals Programming Manual).
Setting the Contrast