120658-1 TE Connectivity, 120658-1 Datasheet - Page 2

• Manufacturer Part Number: 120658-1
• Description: High Speed / Modular Connectors 100P 10ROW PCB HDR
• Manufacturer: TE Connectivity
• Series: 120658r

Specifications of 120658-1

• Number Of Rows: 10
• Number Of Positions / Contacts: 100
• Pitch: 2 mm
• Mounting Style: Through Hole
• Termination Style: Solder Pin
• Housing Material: Glass Filled Polyester
• Contact Material: Phosphor Bronze
• Contact Plating: Gold over Nickel
• Product Type: Connector
• Connector Type: Header
• Pcb Mounting Orientation: Vertical
• Module Type: Center
• Solder Tail Contact Plating: Tin-Lead
• Termination Post Length (mm [in]): 8.20 [0.322]
• Card Slot Pitch (mm [in]): 25.4 [1]
• Rows Per Connector: 10
• Columns Per Connector: 10
• Number Of Signal Contacts: 100
• Centerline (mm [in]): 2.00 [0.079]
• Contact Type: Pin
• Contact Style: Press Fit, Short Tail
• Contact Base Material: Phosphor Bronze
• Contact Configuration: Grounding
• Contact Mating Area Length (mm [in]): 3.90 [0.154]
• Contact Plating, Mating Area, Material: Conforms to Performance Requirements of TE Connectivity Product Specification 108-1957; Based on Telcordia GR-1217-CORE, Applications in Uncontrolled Environments
• Connector Style: Plug
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Lead Free Status / Rohs Status: Details

3.3.
3.4.
3.5.
Rev C
Initial examination of product.
Final examination of product.
Dry circuit resistance.
Change in resistance.
Insulation resistance.
Dielectric withstanding voltage.
Compliant pin resistance.
Ratings
!
!
!
!.
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per EIA-364.
Test Requirements and Procedures Summary
Test Description
Voltage: 250 volts AC
Current: 1.15 ampere (100% loaded)
Temperature: -65 to 105° C
Characteristic Impedance: 50 ohms (single ended), 100 ohms (differential)
Meets requirements of product
drawing.
Meets visual requirements.
20 milliohms maximum for both
signal and ground contacts.
∆R <5 milliohms average value,
<10 milliohms individual reading for
both signal and ground contacts.
10000 megohms minimum.
600 volts AC at sea level,
signal/signal.
300 volts AC at sea level,
signal/ground.
1 minute hold with no breakdown or
flashover.
1 milliohm maximum initial.
∆R 1 milliohm maximum from
initial.
Figure 1 (continued)
ELECTRICAL
Requirement
EIA-364-18.
Visual and dimensional inspection
per product drawing.
EIA-364-18.
Visual inspection.
EIA-364-23.
Subject specimens to 100
milliamperes maximum and 20
millivolts maximum open circuit
voltage.
See Figure 3.
EIA-364-21.
Test between adjacent contacts of
mated specimens.
EIA-364-20.
Test between adjacent contacts or
ground shield of mated specimens.
EIA-364-23.
Subject specimens to 100
milliamperes maximum and 20
millivolts maximum open circuit
voltage. Measurements taken
between PCB hole and bottom of
pin.
Procedure
108-1957
2 of 7