120658-1 TE Connectivity, 120658-1 Datasheet - Page 3
![High Speed / Modular Connectors 100P 10ROW PCB HDR](/photos/39/85/398551/pr6w45049h_sml.jpg)
120658-1
Manufacturer Part Number
120658-1
Description
High Speed / Modular Connectors 100P 10ROW PCB HDR
Manufacturer
TE Connectivity
Series
120658r
Specifications of 120658-1
Number Of Rows
10
Number Of Positions / Contacts
100
Pitch
2 mm
Mounting Style
Through Hole
Termination Style
Solder Pin
Housing Material
Glass Filled Polyester
Contact Material
Phosphor Bronze
Contact Plating
Gold over Nickel
Product Type
Connector
Connector Type
Header
Pcb Mounting Orientation
Vertical
Module Type
Center
Solder Tail Contact Plating
Tin-Lead
Termination Post Length (mm [in])
8.20 [0.322]
Card Slot Pitch (mm [in])
25.4 [1]
Rows Per Connector
10
Columns Per Connector
10
Number Of Signal Contacts
100
Centerline (mm [in])
2.00 [0.079]
Contact Type
Pin
Contact Style
Press Fit, Short Tail
Contact Base Material
Phosphor Bronze
Contact Configuration
Grounding
Contact Mating Area Length (mm [in])
3.90 [0.154]
Contact Plating, Mating Area, Material
Conforms to Performance Requirements of TE Connectivity Product Specification 108-1957; Based on Telcordia GR-1217-CORE, Applications in Uncontrolled Environments
Connector Style
Plug
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Not relevant for lead free process
Rohs/elv Compliance History
Always was RoHS compliant
Lead Free Status / Rohs Status
Details
Rev C
Vibration, sinusoidal.
Mechanical shock, specified pulse.
Durability.
Mating force.
Unmating force.
Compliant pin insertion force.
Compliant pin retention force.
Minute disturbance.
Thermal shock.
Test Description
No discontinuities of 1 microsecond
or longer duration.
See Note.
No discontinuities of 1 microsecond
or longer duration.
See Note.
See Note.
0.75 N [.17 lb] maximum per
contact.
0.15 N [.03 lb] minimum per
contact.
27 N [6 lb] maximum for Eye-of-the-
Needle pin.
49 N [11 lb] maximum for ACTION
PIN* contact.
4.4 N [1 lb] minimum per pin
average.
See Note.
See Note.
Figure 1 (continued)
ENVIRONMENTAL
MECHANICAL
Requirement
EIA-364-28, Condition I.
Subject mated specimens to 10-
500-10 Hz traversed in 1 minute
with 1.5 mm [.06 in] maximum total
excursion. 8 hours in each of 3
mutually perpendicular planes.
See Figure 4.
EIA-364-27, Condition A.
Subject mated specimens to 50 G's
half-sine shock pulses of 11
milliseconds duration. 3 shocks in
each direction applied along 3
mutually perpendicular planes, 18
total shocks.
See Figure 4.
EIA-364-9.
Mate and unmate specimens for
125 cycles at a maximum rate of
600 cycles per hour.
EIA-364-13.
Measure force necessary to mate
specimens at a maximum rate of
12.7 mm [.5 in] per minute.
EIA-364-13.
Measure force necessary to
unmate specimens at a maximum
rate of 12.7 mm [.5 in] per minute.
Measure force necessary to seat
pins to printed circuit board at a
maximum rate of 12.7 mm [.5 in]
per minute.
Measure force necessary to unseat
pins from the printed circuit board
at a maximum rate of 12.7 mm [.5
in] per minute.
Unmate and mate each connector
pair a distance of approximately 0.1
mm [.0039 in].
EIA-364-32.
Subject mated specimens to 10
cycles between -65 and 125° C.
Procedure
108-1957
3 of 7