LCMXO2-1200HC-C-EVN Lattice, LCMXO2-1200HC-C-EVN Datasheet - Page 9

• Manufacturer Part Number: LCMXO2-1200HC-C-EVN
• Description: KIT DEVELOPMENT MACHX02 PLD
• Manufacturer: Lattice
• Series: MachXO2r
• Type: PLDr

Specifications of LCMXO2-1200HC-C-EVN

• Contents: Board, Cable, Documentation, Power Supply
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: LCMXO2-1200HC-MG132CR1
• Other names: 220-1169

Lattice Semiconductor
10. From the MachXO2 Control Evaluation Board, press the reset push-button with reference designator S1. The
Setting Up Linux Minicom
Minicom is a terminal program found with most Linux distributions. It can be used to communicate with the
MachXO2 Control Evaluation Board.
To setup Minicom:
1. Check active serial ports:
2. From a command prompt, start Minicom:
3. Highlight Serial port setup and press Enter. Serial port settings appear.
4. Press A (Serial Device). Specify the active serial device noted in Step 1 and press Enter.
5. Press E (Bps/Par/Bits). Specify 115200, None, 8 and press Enter.
6. Press F (Hardware Flow Control). Specify None and press Enter.
7. Press Esc. The configuration menu appears.
8. Select Save setup as dfl. Minicom saves the port setup as the new default.
9. Select Exit. The Minicom interface appears.
10. From the evaluation board, press the S1 push-button (GSR).The Control SoC demo main menu appears.
Ordering Information
Technical Support Assistance
Hotline: 1-800-LATTICE (North America)
e-mail:
Internet:
MachXO2 Control Development Kit
Control SoC demo main menu appears.
Note the tty label assigned to the USB port
The configuration menu appears.
#minicom –s
#dmesg | grep tty
[phone] (Outside North America)
[e-mail]
www.latticesemi.com
Description
LCMXO2-1200HC-C-EVN
Ordering Part Number
9
MachXO2 Control Development Kit
China RoHS Environment-Friendly
Use Period (EFUP)
User’s Guide