RN-XV Roving Networks Inc, RN-XV Datasheet - Page 65

• Manufacturer Part Number: RN-XV
• Description: MODULE 802.11B/G 2.4GHZ
• Manufacturer: Roving Networks Inc
• Series: -r

Specifications of RN-XV

• Frequency: 2.4GHz
• Data Rate - Maximum: 54Mbps
• Modulation Or Protocol: 802.11b/g
• Applications: General Purpose
• Power - Output: 12dBm
• Sensitivity: -83dBm
• Voltage - Supply: 3 V ~ 3.7 V
• Current - Receiving: 40mA
• Current - Transmitting: 180mA
• Data Interface: PCB, Through Hole
• Memory Size: -
• Antenna Connector: On-Board, Wire Antenna
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 740-1044; RN-XV-W; RN-XVEE; XVEE

set ftp timer <value>. Once you finish writing to the file, this timer will start counting down and close the
file when the timer counts down to zero. The timer is 1/8
5 seconds, the command is
The retrieved file from the FTP server is not stored on the WiFly module‟s flash memory. The WiFly
module acts as a transport and passes the file over the uart interface as the file is being transferred.
To retrieve a file from the FTP server issue the following command from the WiFly module:
ftp get <filename>
This will then print the open string on the uart and then the file will start transferring from the FTP server to
the WiFly module. Once the file transfer is complete, the WiFly module will print the close string indicating
the file is successfully transferred and the FTP connection is closed.
For example, to retrieve the file demo.txt, the command is
ftp get demo.txt
set ftp timer 40
The open and close stings are configurable using the following commands:
set comm open <string>
set comm close <string>
15.1.2.
www.rovingnetworks.com
809 University Avenue
Retrieving a file from FTP server
•
Los Gatos, CA 95032
~ 65 ~
•
Tel [phone]
th
of the actual value. For example, to set a timer of
• [e-mail]
WiFly-RN-UM
WiFly GSX/EZX
5/4/2011