5384 3M Interconnect Solutions, 5384 Datasheet - Page 12

Manufacturer Part Number

5384

Description

Manufacturer

3M Interconnect Solutions

Datasheet

1.5384.pdf (16 pages)

Lead Free Status / Rohs Status

Supplier Unconfirmed

21.

22.

23.

Figure 22

Figure 23

Figure 24

Note: To ease jacket removal, install constant force spring as shown in Figure 23 and ring cut 80% through jacket.

Remove constant force spring. Bend shield wires back upon cable jacket 3" (76 mm). Cut excess shield

wire and discard (Figure 22).

Remove semi-conductive jacket to dimension shown in Figure 23.

Select one mastic strip from kit and remove white release liners. Using light tension, apply a single wrap

of mastic around the cable jacket 1/4" (6 mm) from shield wires (Figure 24). Cut off excess.

Remove jacket section by pulling against constant force spring. DO NOT BELL SEMI-CON JACKET.

Remove constant force spring.

Some UniShield

cable preparation.

��

cables feature dual-layer semi-conductive jackets. Both layers must be removed during

��

� ��

��

78-8126-9102-6-B