5384 3M Interconnect Solutions, 5384 Datasheet - Page 8

Manufacturer Part Number

5384

Description

Manufacturer

3M Interconnect Solutions

Datasheet

1.5384.pdf (16 pages)

Lead Free Status / Rohs Status

Supplier Unconfirmed

Note: Ground braid, constant force spring and cold shrink jacket tube are in the same bag.

10.

Figure 11

Figure 12

Position pre-formed ground braid with short tail over tape shield directly adjacent to cable jacket cut

edge. Position long tail of ground braid, extending over cable jacket with solder block over mastic strip

(Figure 11). Secure ground braid to cable jacket using vinyl tape at least 2" (50 mm) from edge of cable

jacket (Figure 11).

Wrap ground braid around cable tape shield one complete wrap, trim excess to prevent overlap and

secure in place with constant force spring. Wrap spring in same direction as ground braid (Figure 12).

Cinch (tighten) the spring after wrapping the final winding.

Select second mastic strip from kit and remove white release liners. Apply a second mastic band over

solder block on ground braid and previously applied mastic (Figure 12) Cut off excess.

��

78-8126-9102-6-B