166981-003 FCI, 166981-003 Datasheet - Page 5

• Manufacturer Part Number: 166981-003
• Manufacturer: FCI

Specifications of 166981-003

• Lead Free Status / Rohs Status: Not Compliant

4.0
TITLE
Specification of Requirements for Cable Preparation, Wire Termination and
Copyright FCI
Form E-3334
Rev E
Product Descriptions
4.1
“w” specifies the plating on the separable contact
“y” specifies the wire gage capacity
Assembly of Connectors Using 72392-type Contacts
w = 1 , for 0.8um Gold
w = 2 , for 2.0um Gold
w = 3 , for 1.3um Gold
w = 9 , for 0.8um GXT
72476 type 4-row Metral™ Unshielded Connector
This connector is a 4x6 2mm pitch cable connector with IDC type contacts. The connectors are sold in
kits with the following variations.
y = 1 , for 26-24 gage wire
y = 2 , for 30-28 gage wire
The difference between the standard latch finger ( x = 1 ) and the short latch finger ( x = 2 ) is that the
standard latch stands above the cable tie and is easier to access but thus restricts the maximum diameter
cable that can be used. In certain cases the use of multiple cables or the stripping of the cable jacket
above the cable tie area of the connector will allow the user to overcome some restrictions.
as 72476-wxy1 where
Standard Latch Finger
TYPE
Product Number
72476-w1y1
APPLICATION SPECIFICATION
Figure 1 4x6 Unshielded Connector
PDM: Rev:J
Short Latch Finger
Product Number
72476-w2y1
“x” specifies the latch finger type
x = 1 , for cable diameters up to 7.0mm
x = 2 , for cable diameters up to 11.0mm
NUMBER
PAGE
AUTHORIZED BY
STATUS
STATUS:
J.R. Volstorf
5 of 29
UNRESTRICTED
Released
GS-20-002
REVISION
DATE
25-Apr-06
Printed: Nov 27, 2010
J
GS-01-001
.