DSO6032A-GSA AGILENT TECHNOLOGIES, DSO6032A-GSA Datasheet - Page 5

• Manufacturer Part Number: DSO6032A-GSA
• Description: 69R7191
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of DSO6032A-GSA

• Scope Bandwidth: 300 MHz
• Scope Type: Digital Bench
• Scope Channels: 2 Scope
• Bandwidth: 300MHz
• Meter Display Type: XGA LCD
• Sampling Rate: 2GSPS
• Input Impedance: 1Mohm
• Rise Time: 1.17ns
• Input Voltage: 400V P-p
• Rohs Compliant: NA

Other useful features
High resolution mode. Offers up to 12
bits of vertical resolution in real-time,
single-shot mode. This is accomplished
by serially fi ltering sequential data points
and mapping the fi ltered results to the
display when operating at time base set-
tings greater than 10-μs/div.
Help is at your fi ngertips. An embedded
help system – available in 11 languages
– gives you quick answers if you don’t
understand a feature. Simply press and
hold the corresponding front-panel key,
and a screen pops up to explain its func-
tion.
Waveform math with FFT. Analysis func-
tions include subtract, multiply, integrate,
square root, and differentiate, as well as
fast Fourier transforms (FFT).
Peak detect. 250 ps on 500-MHz and 1-
GHz models, 500 ps on 350-MHz models
and 1 ns on 100-MHz models helps you
fi nd narrow glitches.
AutoProbe interface. Automatically sets
probe attenuation factors and provides
power for selected active probes, includ-
ing the award-winning 1130A 1.5-GHz
Infi niiMax differential active probe and
1156A 1.5-GHz single-ended active probe
systems.
5-digit hardware counter. Measures
frequency up to the bandwidth of the
scope.
Trig Out and Reference Clock In/Out.
Provides an easy way to synchronize
your scope to other instruments. Use the
Trig Out port to connect your scope to a
frequency counter for more accurate fre-
quency measurements or to cross trigger
other instruments.
Autoscale. Displays all analog and digital
active signals, and automatically sets the
vertical, horizontal and trigger controls.
23 automatic measurements with
statistics Get up to 4 simultaneous
measurements with 5 additional statistics
beyond the current value. Fast update
rate provides statistical data for enabled
measurements such as mean, min, max,
standard deviation and count. Pressing
[QuickMeas] brings up the last four au-
tomated measurements selected. Cursors
automatically track the most recently
selected measurement.
Analog HDTV/EDTV trigger. The 6000
Series comes standard with analog
HDTV/EDTV triggering for standards
like 1080i, 1080p, 720p and 480p as well
as standard video triggering on any line
within a fi eld, all lines, all fi elds and odd
or even fi elds for NTSC, SECAM, PAL and
PAL-M video signals.
Bus mode display (on MSO models).
Quick and easy read-out of hexadecimal
or binary representation of logic signals.
Easy software upgrades. System
software is stored in fl ash ROM that can
be upgraded from the scope’s built-in
USB port or LAN. You can fi nd the latest
system and IntuiLink software at: www.
agilent.com/fi nd/mso6000sw
Press and hold a key for instant help.
Measurement statistics allow you
to have confi dence in your measure-
ments. Statistics can show that a
measurement is not only correct at
one moment, but that it has stabilized
and has a low variance over time,
giving it a higher statistical validity.
Digital signals can be displayed indi-
vidually or as overlayed bus values.
5