MSO7012A-GSA AGILENT TECHNOLOGIES, MSO7012A-GSA Datasheet - Page 24
![69R7236](/photos/40/41/404153/4395408_sml.jpg)
MSO7012A-GSA
Manufacturer Part Number
MSO7012A-GSA
Description
69R7236
Manufacturer
AGILENT TECHNOLOGIES
Datasheet
1.MSO7000-SGM.pdf
(28 pages)
Specifications of MSO7012A-GSA
Scope Type
Hand Held
Scope Channels
2 Scope
Bandwidth
100MHz
Meter Display Type
XGA LCD
Sampling Rate
2GSPS
Input Impedance
1Mohm
Rise Time
3.5ns
Input Voltage
40V P-p
Rohs Compliant
NA
Performance characteristics
General characteristics (continued)
Trigger out
10 MHz ref in/out
Kensington lock
Power requirements
Line voltage range
Line frequency
Power usage
Environmental characteristics
Ambient temperature
Humidity
Altitude
Vibration
Shock
Pollution degree
Typical operator noise
Indoor use
Other
Measurement categories
Regulatory information
Supplementary information
24
When Triggers is selected (delay ~17 ns)
When Source Frequency or Source Frequency/8 is selected
Max frequency output: 350 MHz (in source frequency mode when terminated in 50 Ω)
TTL out, 180 mV to 1 V amplitude with 0 to 2 V offset
Connection on rear panel for security
100-120V, 50/60/400 Hz; 100-240V, 50/60 Hz auto ranging
50/60 Hz, 100-240 VAC; 400 Hz, 100-120 VAC
120 W max
Operating -10 °C to +55 °C; non-operating –40 °C to +70 °C
Operating 95% RH at 40 °C for 24 hr; non-operating 90% RH at 65 °C for 24 hr
Operating to 4,570 m (15,000 ft); non-operating to 15,244 m (50,000 ft)
Agilent class B1 and MIL-PRF-28800F; class 3 random
Agilent class B1 and MIL-PRF-28800F; class 3 random; (operating 30g, 1/2 sine,
11 ms duration, 3 shocks/axis along major axis, total of 18 shocks)
Normally only dry non-conductive pollution occurs.
Occasionally a temporary conductivity caused by condensation must be expected.
30 dBa at front of instrument, 35 dBa at rear of instrument.
Rated for indoor use only
CAT I
Safety IEC 61010-1:2001 / EN 61010-1:2001
Canada: CSA C22.2 No. 1010.1:1992
UL 61010B-1:2003
The product herewith complies with the requirements of the Low Voltage Directive
73/23/EEC and the EMC Directive 89/336/EEC, and carries the CE-marking accordingly.
The product was tested in a typical configuration with HP/Agilent test systems.
0 to 5 V into high impedance
0 to 2.5 V into 50 Ω
0 to 580 mV into high impedance
0 to 290 mV into 50 Ω
(continued)
125 MHz (in source frequency/8 mode when terminated in 50 Ω)