MSO7012A-GSA AGILENT TECHNOLOGIES, MSO7012A-GSA Datasheet - Page 5
![69R7236](/photos/40/41/404153/4395408_sml.jpg)
MSO7012A-GSA
Manufacturer Part Number
MSO7012A-GSA
Description
69R7236
Manufacturer
AGILENT TECHNOLOGIES
Datasheet
1.MSO7000-SGM.pdf
(28 pages)
Specifications of MSO7012A-GSA
Scope Type
Hand Held
Scope Channels
2 Scope
Bandwidth
100MHz
Meter Display Type
XGA LCD
Sampling Rate
2GSPS
Input Impedance
1Mohm
Rise Time
3.5ns
Input Voltage
40V P-p
Rohs Compliant
NA
Other useful features
High resolution mode. Offers up to 12 bits
of vertical resolution in real-time, single-shot
mode. This is accomplished by serially
fi ltering sequential data points and
mapping the fi ltered results to the display
when operating at time base settings greater
than 10-μs/div.
Help is at your fi ngertips. An embedded help
system – available in 11 languages – gives
you quick answers if you don’t understand
a feature. Simply press and hold the corre-
sponding front-panel key, and a screen pops
up to explain its function.
Waveform math with FFT. Analysis functions
include subtract, multiply, integrate, square
root, and differentiate, as well as fast Fourier
transforms (FFT).
Peak detect. 250 ps on 500-MHz and 1-GHz
models, 500 ps on 350-MHz models. Helps
you fi nd narrow glitches.
AutoProbe interface. Automatically sets
probe attenuation factors and provides power
for selected active probes, including the
award-winning 1130A 1.5-GHz Infi niiMax
differential active probe and 1156A 1.5-GHz
single-ended active probe systems.
5-digit hardware counter. Measures fre-
quency up to the bandwidth of the scope and
provides accurate and repeatable results. Can
be increased to 8 digits with an external 10
MHz reference.
Trig Out and Reference Clock In/Out. Pro-
vides an easy way to synchronize your scope
to other instruments. Use the Trig Out port to
connect your scope to a frequency counter
for more accurate frequency measurements
or to cross trigger other instruments.
Autoscale. Displays all analog and digital
active signals, and automatically sets the
vertical, horizontal and trigger controls.
23 automatic measurements with statistics.
Get up to 4 simultaneous measurements with
5 additional statistics beyond the current
value. Fast update rate provides statisti-
cal data for enabled measurements such
as mean, min, max, standard deviation and
count. Pressing [QuickMeas] brings up the
last four automated measurements selected.
Cursors automatically track the most recently
selected measurement.
Analog HDTV/EDTV trigger. The 7000 Series
comes standard with analog HDTV/EDTV
triggering for standards like 1080i, 1080p,
720p and 480p as well as standard video
triggering on any line within a fi eld, all lines,
all fi elds and odd or even fi elds for NTSC,
SECAM, PAL and PAL-M video signals.
Bus mode display (on MSO models). Quick
and easy read-out of hexadecimal or binary
representation of logic signals.
Easy software upgrades. System software
is stored in fl ash ROM that can be upgraded
from the scope’s built-in USB port or LAN.
You can fi nd the latest system and IntuiLink
software at:
www.agilent.com/fi nd/7000sw
Press and hold a key for instant help.
Measurement statistics allow you to
have confi dence in your measurements.
Statistics can show that a measure-
ment is not only correct at one moment,
but that it has stabilized and has a low
variance over time, giving it a higher
statistical validity.
Digital signals can be displayed
individually or as overlayed bus values.
5