DS1005-75 Maxim Integrated Products, DS1005-75 Datasheet - Page 5

• Manufacturer Part Number: DS1005-75
• Description: Active Tapped Delay Line 5 TAP 1-IN 15ns ABS 75ns MAX 14-Pin PDIP N
• Manufacturer: Maxim Integrated Products

Specifications of DS1005-75

• Package: 14PDIP N
• Number Of Taps: 5
• Delay To First Tap: 15 ns
• Increment Range: 5 to 20 ns
• Maximum Delay Time: 75 ns
• Operating Supply Voltage: 5 V

TEST SETUP DESCRIPTION
Figure 3 illustrates the hardware configuration used for measuring the timing parameters on the DS1005.
The input waveform is produced by a precision pulse generator under software control. Time delays are
measured by a time interval counter (20 ps resolution) connected between the input and each tap. Each
tap is selected and connected to the counter by a VHF switch control unit. All measurements are fully
automated, with each instrument controlled by a central computer over an IEEE 488 bus.
TEST CONDITIONS
INPUT:
Ambient Temperature
Supply Voltage (V
Input Pulse
Source Impedance
Rise and Fall Time
Pulse Width
Period
OUTPUT:
Each output is loaded with the equivalent of a 74F04 input gate. Delay is measured at the 1.5V level on
the rising and falling edge.
NOTE:
Above conditions are for test only and do not restrict the operation of the device under other data sheet
conditions.
CC
)
25 C =3 C
5.0V =0.1V
High = 3.0V =0.1V
Low = 0.0V =0.1V
3.0 ns maximum
500 ns
1 s
50 ohm maximum
5 of 6
DS1005