XC3195A-1PQ160C Xilinx Inc, XC3195A-1PQ160C Datasheet - Page 13

• Manufacturer Part Number: XC3195A-1PQ160C
• Description: FPGA XC3100A Family 7.5K Gates 484 Cells 323MHz CMOS Technology 5V 160-Pin PQFP
• Manufacturer: Xilinx Inc

Specifications of XC3195A-1PQ160C

• Package: 160PQFP
• Family Name: XC3100A
• Device Logic Units: 484
• Device System Gates: 7500
• Number Of Registers: 1320
• Maximum Internal Frequency: 323 MHz
• Typical Operating Supply Voltage: 5 V
• Maximum Number Of User I/os: 138
• Ram Bits: 94944
• Re-programmability Support: Yes

Longlines
The Longlines bypass the switch matrices and are intended
primarily for signals that must travel a long distance, or
must have minimum skew among multiple destinations.
Longlines, shown in
tally the height or width of the interconnect area. Each inter-
connection column has three vertical Longlines, and each
interconnection row has two horizontal Longlines. Two
additional Longlines are located adjacent to the outer sets
of switching matrices. In devices larger than the XC3020A
and XC3120A FPGAs, two vertical Longlines in each col-
November 9, 1998 (Version 3.1)
Figure 14: Horizontal and Vertical Longlines. These Longlines provide high fan-out, low-skew signal distribution in
each row and column. The global buffer in the upper left die corner drives a common line throughout the FPGA.
R
Figure
14, run vertically and horizon-
XC3000 Series Field Programmable Gate Arrays
umn are connectable half-length lines. On the XC3020A
and XC3120A FPGAs, only the outer Longlines are con-
nectable half-length lines.
Longlines can be driven by a logic block or IOB output on a
column-by-column basis. This capability provides a com-
mon low skew control or clock line within each column of
logic blocks. Interconnections of these Longlines are
shown in
input to a Longline and are enabled automatically by the
development system when a connection is made.
Figure
15. Isolation buffers are provided at each
7-15
7