T494B107K010AT Kemet, T494B107K010AT Datasheet - Page 103

• Manufacturer Part Number: T494B107K010AT
• Description: CAP TANT 100UF 10V 10% 1210
• Manufacturer: Kemet
• Series: T494r
• Type: Moldedr

Specifications of T494B107K010AT

• Capacitance: 100µF
• Voltage - Rated: 10V
• Tolerance: ±10%
• Esr (equivalent Series Resistance): 2.250 Ohm
• Operating Temperature: -55°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 1210 (3528 Metric)
• Size / Dimension: 0.138" L x 0.110" W (3.50mm x 2.80mm)
• Height - Seated (max): 0.083" (2.10mm)
• Lead Spacing: -
• Manufacturer Size Code: B
• Features: General Purpose
• Lifetime @ Temp.: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 399-5600-2

KEMET Organic Capacitor (KO-CAP)
T530 High Capacitance/125°C Rated Polymer Tantalum
Overview
The KEMET Organic Capacitor (KO-CAP) is a tantalum capacitor
with a Ta anode and Ta
polymer replaces the traditionally used MnO
plate of the capacitor. This results in very low ESR and improved
capacitance retention at high frequency. The KO-CAP also
exhibits a benign failure mode which eliminates the ignition
failures that can occur in standard MnO
CAPs may also be operated at steady state voltages up to 90%
of rated voltage for part types with rated voltages of ≤10 volts and
up to 80% of rated voltage for part types >10 volts with equivalent
or better reliability than traditional MnO
operated at 50% of rated voltage.
Benefi ts
• ESR: 4mΩ to 40mΩ
• 125°C maximum operating temperature
• Polymer cathode technology
• High frequency capacitance retention
• Non-ignition failure mode
• Capacitance: 150µF to 1500µF
• 100% accelerated steady state aging
• 100% surge current tested
• Utilizes multiple tantalum anode technology
• Volumetric effi ciency
• Use up to 90% of rated voltage (10% derating) for part types ≤10V
• Use up to 80% of rated voltage (20% derating) for part types >10V
• Self-healing mechanism
• EIA standard case sizes
Environmental Compliance
RoHS Compliant (6/6)* according to Directive 2002/95/EC
*When ordered with 100% Sn Solder
SPICE
For a detailed analysis of specifi c part numbers, please visit kemet.com for a free download of KEMET’s SPICE software. The KEMET
SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency,
temperature, ripple, and DC bias conditions.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com
One WORLD
2
O
5
dielectric. A conductive organic
2
2
One Brand
tantalum capacitors
tantalum types. KO-
2
as the cathode
One Strategy
The T530 Series KO-CAP offers the same advantages as
the T520 Series but also has the added advantages of higher
capacitance, 125°C performance capability, higher ripple current
handling capability and a lower ESR range. Packaged as multiple
anodes to reduce the depth that the signal must penetrate, this
parallel arrangement reduces the ESR further still to achieve the
highest capacitance and lowest ESR of any other type of surface
mount capacitor with typical ESR values as low as 4 mΩ. With
reduced ESR, the enhanced capacitance retention at higher
frequencies provides the lowest total capacitance and most
economical solution for high power applications.
Applications
Typical applications include high speed server, microprocessor
decoupling and high ripple current applications.
One Focus
One Team
One KEMET
TC102_LOWESR • 9/8/2011 103
T2019_T530 • 9/8/2011
1