176392-4 TE Connectivity, 176392-4 Datasheet - Page 10

• Manufacturer Part Number: 176392-4
• Manufacturer: TE Connectivity

Specifications of 176392-4

• Product Type: Connector
• Connector Type: Connector Assembly
• Termination Method To Wire/cable: IDC
• Sealed: No
• Contact - Rated Current (a): 3
• Operating Voltage Reference: AC/DC, AC, DC
• Operating Voltage (vac): 125
• Operating Voltage (vdc): 125
• Wire/cable Size (awg): 26 – 28
• Profile Height (y-axis) (mm [in]): 5.10 [0.200]
• Number Of Positions: 4
• Number Of Rows: 1
• Centerline (mm [in]): 2.00 [0.079]
• Mating Retention: Without
• Length (x-axis) (mm [in]): 10.00 [0.393]
• Width (z-axis) (mm [in]): 4.60 [0.181]
• Contact Type: Socket
• Contact Plating, Mating Area, Material: Gold
• Contact Plating, Mating Area, Thickness (µm [?in]): 0.2 [7.87]
• Connector Style: Receptacle
• Housing Color: Natural
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Operating Temperature (°c [°f]): -30 – +105 [-22 – +221]
• Applies To: Wire/Cable
• Accepts Wire Insulation Diameter, Range (mm [in]): 0.83 – 1.05 [0.032 – 0.041]
• Application Use: Wire-to-Board, Wire-to-Board / Wire-to-Wire, Wire-to-Wire
• Contact Transmits (typical Application): Signal (Data)
• Packaging Method: Bag, Box

ASHL-0005- ES REV B
Discrete Wire UL 1571
Ribbon Cable UL 2651
Flat
Shielded
Wire
Discrete
Wire
Specifications (Nominal)
Applicable Wire
4.
4.1
4.2
5.
UL 2547
UL 1061
UL 20058
UL 1691
UL 2791
UL 1533
UL 1728
Quality Assurance Provisions:
Test Conditions:
Unless otherwise specified, all the tests shall be performed under any combination of the
following test conditions.
Temperature
Relative Humidity
Atmospheric Pressure
Test Specimens:
The test specimens to be used for the performance evaluation testing, shall be prepared in
accordance with AMP Application Specification, 114-5104, Termination of AMP CT
Connector, 2 mm Pitch, M/T Type, by using the samples selected from the current production
at random, and conforming to the requirements of the applicable product drawing.
Applicable Wires:
(Note: For compatibility of the wires for termination, the wires must be evaluated respectively,
by the manufacturers, brand, tradenames and product catalog numbers.)
AMP Shanghai Ltd.
Tyco Electronics
# 26 AWG
# 28 AWG
# 24 AWG
Wire Size
: 15~30
: 45~75 %
: 86.7~107kPa (650~800 mmHg)
Conductor (mm)
No. of Diameter
Conductors of a
o
C
# 26 AWG
# 28 AWG
# 24 AWG
10 of 12
(7/0.127)
(7/0.203)
PAGE
(7/0.16)
Document No.
Calculated Cross-
sectional Area
# 26 AWG
# 28 AWG
# 24 AWG
(mm
(0.14)
(0.08)
(0.22)
108-5218
2
)
Diameter (mm)
# 26 AWG
# 28 AWG
# 24 AWG
(0.93/1.05)
(0.83/0.97)
(0.95/1.05)
Insulation
REV
S
LOC
ES