176392-4 TE Connectivity, 176392-4 Datasheet - Page 5

• Manufacturer Part Number: 176392-4
• Manufacturer: TE Connectivity

Specifications of 176392-4

• Product Type: Connector
• Connector Type: Connector Assembly
• Termination Method To Wire/cable: IDC
• Sealed: No
• Contact - Rated Current (a): 3
• Operating Voltage Reference: AC/DC, AC, DC
• Operating Voltage (vac): 125
• Operating Voltage (vdc): 125
• Wire/cable Size (awg): 26 – 28
• Profile Height (y-axis) (mm [in]): 5.10 [0.200]
• Number Of Positions: 4
• Number Of Rows: 1
• Centerline (mm [in]): 2.00 [0.079]
• Mating Retention: Without
• Length (x-axis) (mm [in]): 10.00 [0.393]
• Width (z-axis) (mm [in]): 4.60 [0.181]
• Contact Type: Socket
• Contact Plating, Mating Area, Material: Gold
• Contact Plating, Mating Area, Thickness (µm [?in]): 0.2 [7.87]
• Connector Style: Receptacle
• Housing Color: Natural
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Operating Temperature (°c [°f]): -30 – +105 [-22 – +221]
• Applies To: Wire/Cable
• Accepts Wire Insulation Diameter, Range (mm [in]): 0.83 – 1.05 [0.032 – 0.041]
• Application Use: Wire-to-Board, Wire-to-Board / Wire-to-Wire, Wire-to-Wire
• Contact Transmits (typical Application): Signal (Data)
• Packaging Method: Bag, Box

ASHL-0005- ES REV B
3.8.1 (2)
3.8.1 (3)
3.8.1 (4)
Para.
Contact
Unmating Force
Tensile Strength
of Wire
Termination
Post Contact
Retention Force
Test Items
AMP Shanghai Ltd.
Tyco Electronics
14.7N Min. per contact.
0.784N Min.
# 26 (except UL
10272) & #24
Apply Ribbon Cables and Flat Shielded Wire
# 26 & #24
Wire Size
# 26 (UL
Wire Size
(AWG)
10272)
(AWG)
# 28
# 28
Requirements
Fig. 2 (To be continued)
Direction
Traverse
Direction
Traverse
Unit: N
Unit: N
[Min.]
[Min.]
5 of 12
11.8
11.8
14.7
PAGE
7.8
7.8
Direction
Direction
Document No.
Unit: N
Unit: N
[Min.]
[Min.]
Axial
Axial
14.7
19.6
14.7
19.6
19.6
108-5218
After preconditioning by using
applicable post for 3 cycles,
measure the force required to
unmate post by operating the
head at a rate of 50mm a
minute.
Apply a pull-off load to
terminated wire of contact
secured on the tester, at a rate
of 100mm a minute.
The load is applied in the axial
and lateral directions as
specified.
Apply axial load to contact by
operating at a rate of 50 mm a
minute, after preconditioning
for 3 insertion/extraction cycles
by using applicable post
contact. See Fig. 5.
Procedures
REV
S
LOC
ES