STM8S105S6 STMicroelectronics, STM8S105S6 Datasheet - Page 18

• Manufacturer Part Number: STM8S105S6
• Description: Access line, 16 MHz STM8S 8-bit MCU, up to 32 Kbytes Flash, integrated EEPROM
• Manufacturer: STMicroelectronics

Specifications of STM8S105S6

• Ram: Up to 2 Kbytes
• Advanced Control Timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, deadtime insertion and flexible synchronization
• Two Watchdog Timers: Window watchdog and independent watchdog

Product overview
4.13
4.14
4.14.1
18/127
Timer
TIM4
Counter
size
(bits)
8
Analog-to-digital converter (ADC1)
The STM8S105xx products contain a 10-bit successive approximation A/D converter (ADC1)
with up to 10 multiplexed input channels and the following main features:
•
•
•
•
•
•
•
•
•
•
Communication interfaces
The following communication interfaces are implemented:
•
•
•
UART2
Main features
•
•
•
•
•
Input voltage range: 0 to V
Conversion time: 14 clock cycles
Single and continuous and buffered continuous conversion modes
Buffer size (n x 10 bits) where n = number of input channels
Scan mode for single and continuous conversion of a sequence of channels
Analog watchdog capability with programmable upper and lower thresholds
Analog watchdog interrupt
External trigger input
Trigger from TIM1 TRGO
End of conversion (EOC) interrupt
UART2: Full feature UART, synchronous mode, SPI master mode, Smartcard mode, IrDA
mode, LIN2.1 master/slave capability
SPI : Full and half-duplex, 8 Mbit/s
I²C: Up to 400 Kbit/s
One Mbit/s full duplex SCI
SPI emulation
High precision baud rate generator
Smartcard emulation
IrDA SIR encoder decoder
Note: Additional AIN12 analog input is not selectable in ADC scan mode or with analog
watchdog. Values converted from AIN12 are stored only into the ADC_DRH/ADC_DRL
registers.
Prescaler
Any power of 2 from
1 to 128
Counting
mode
Up
DDA
DocID14771 Rev 10
CAPCOM
channels
0
Complem.
outputs
0
Ext.
trigger
No
Timer
synchronization/
chaining
STM8S105xx