STM8L152C4 STMicroelectronics, STM8L152C4 Datasheet - Page 60

• Manufacturer Part Number: STM8L152C4
• Description: SM8L-Ultra Low Power-8 bit Microcontrollers
• Manufacturer: STMicroelectronics

Specifications of STM8L152C4

• Temp. Range: - 40 °C to 85, 105 or 125 °C
• 5 Low Power Modes: Wait, Low power run (5.1 μA), Low power wait (3 μA), Active-halt with full RTC (1.3 μA), Halt (350 nA)
• Consumption: 195 μA/MHz+440μA
• Ultralow Leakage Per I/0: 50 nA
• Fast Wakeup From Halt: 4.7 μs
• Lcd: up to 4x28 segments w/ step-up converter
• 4 Channels; Supported Peripherals: ADC, DAC, SPI, I2C, USART, timers
• 2 Watchdogs: 1 Window, 1 Independent

Electrical parameters
9
9.1
9.1.1
9.1.2
9.1.3
9.1.4
60/126
Electrical parameters
Parameter conditions
Unless otherwise specified, all voltages are referred to V
Minimum and maximum values
Unless otherwise specified the minimum and maximum values are guaranteed in the worst
conditions of ambient temperature, supply voltage and frequencies by tests in production on
100% of the devices with an ambient temperature at T
the selected temperature range).
Data based on characterization results, design simulation and/or technology characteristics
is indicated in the table footnotes and are not tested in production. Based on
characterization, the minimum and maximum values refer to sample tests and represent the
mean value plus or minus three times the standard deviation (mean±3 ).
Typical values
Unless otherwise specified, typical data is based on T
design guidelines and is not tested.
Typical ADC accuracy values are determined by characterization of a batch of samples from
a standard diffusion lot over the full temperature range, where 95% of the devices have an
error less than or equal to the value indicated (mean±2 )
Typical curves
Unless otherwise specified, all typical curves are given only as design guidelines and are
not tested.
Loading capacitor
The loading conditions used for pin parameter measurement are shown in
Figure 10. Pin loading conditions
Doc ID 15962 Rev 9
50 pF
STM8L PIN
A
A
= 25 °C, V
= 25 °C and T
SS
.
.
STM8L151xx, STM8L152xx
DD
= 3 V. It is given only as
A
= T
A
Figure
max (given by
10.