ISL45042AIRZ-TK Intersil, ISL45042AIRZ-TK Datasheet - Page 2

• Manufacturer Part Number: ISL45042AIRZ-TK
• Description: IC LCD CALIBRATOR 8-TDFN
• Manufacturer: Intersil
• Type: Calibratorr

Specifications of ISL45042AIRZ-TK

• Applications: LCD Display
• Mounting Type: Surface Mount
• Package / Case: 8-TDFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Pin Descriptions
Block Diagram
CTL
AVDD
OUT
GND
V
CTL
SET
N/C
PIN
CE
DD
Adjustable Sink Current Output Pin. The current sinks into the OUT pin is equal to the DAC setting times the maximum adjustable sink
current divided by 128. See SET pin function in “Pin Descriptions” on page 2 for the maxim adjustable sink current setting.
High-Voltage Analog Supply. Connects to top of external resistor divider to determine the V
to GND with 0.1µF de-coupling capacitor.
No Connect. Not internally connected.
Ground connection.
ISL45042A power supply input. Bypass to GND with 0.1µF de-coupling capacitor.
Internal Counter Up/Down Control and Internal EEPROM Programming Control Input. If CE is high, a mid-to-low transition increments
the 7-bit counter, raising the DAC setting, increasing the OUT sink current, and lowering the divider voltage at OUT. A mid-to-high
transition decrements the 7-bit counter, lowering the DAC setting, decreasing the OUT sink current, and increasing the divider voltage
at OUT. Applying 4.9V and above with appropriately arranged timing will overwrite EEPROM with the contents in the 7-bit counter.
See EEPROM Programming section in “Electrical Specifications” table on page 4 for details.
Counter Enable Pin. Connect CE to VDD to enable adjustment of the output sink current. Float or connect CE to GND to prevent
further adjustment or programming (note: the CE pin has an internal pull-down resistor).
Maximum Sink Current Adjustment Point. Connect a resistor from the SET pin to GND to set the maximum adjustable sink current of
the OUT pin. The maximum adjustable sink current is equal to (AVDD/20) divided by RSET.
400kΩ
500kΩ
TO
DIGITAL INTERFACE
GND
WITH THRESHOLD
SENSORS
2
CE
VDD
PRGM
PWRUP
PRGM
DWN
POR
POR
UP
UP/DOWN COUNTER
ISL45042A
WITH PRESET
NVL MEMORY
READ
ISL45042A
LATCHES
EEPROM
IBIAS
OR
FUNCTION
PRGM MEMORY
COM
CURRENT OUTPUT
ANALOG DCP AND
voltage. Typically 10V to 20V. Bypass
BLOCK
AVDD
July 9, 2008
IOUT
SET
FN6158.4