BTS 5590G Infineon Technologies, BTS 5590G Datasheet - Page 12
![no-image](/images/manufacturer_photos/0/3/327/infineon_technologies_sml.jpg)
BTS 5590G
Manufacturer Part Number
BTS 5590G
Description
Manufacturer
Infineon Technologies
Datasheet
1.BTS_5590G.pdf
(46 pages)
Specifications of BTS 5590G
Packages
PG-DSO-36
Channels
5.0
Channel Mix
2*25mohm+1*40mohm+2*100mohm
Led Mode
Yes
Cranking Mode
No
Pwm Engine Integrated
No
Absolute Maximum Ratings
T
(unless otherwise specified).
Pos.
4.1.23 Voltage at limp home delay pin
4.1.24 Current through limp home delay pin
Temperatures
4.1.25 Junction temperature
4.1.26 Dynamic temperature increase while switching
4.1.27 Storage temperature
ESD Susceptibility
4.1.28 ESD resistivity HBM
1) Not subject to production test, specified by design.
2) Specified
3) In accordance to AEC Q100-012 and AEC Q101-006.
4)
5) Current limitation is a protection feature. Operation in current limitation is considered as “outside” normal operating range.
6) ESD resistivity, HBM according to EIA/JESD 22-A 114B (1.5k
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
Data Sheet
j
= -40 °C to +150 °C; all voltages with respect to ground, positive current flowing into pin.
(Chip+Package) was simulated on a 76.2 x 114.3 x 1.5 mm board with 2 inner copper layers (2 x 70µm Cu, 2 x 35µm Cu).
R
Protection features are not designed for continuous repetitive operation.
I
maximum rating conditions for extended periods may affect device reliability.
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
is the internal resistance of the load dump pulse generator.
Parameter
R
thJA
value is according to Jedec JESD51-2,-5,-7 at natural convection on FR4 2s2p board; The Product
1)
other pins
OUT pins
12
Ω
, 100pF).
Symbol
V
I
T
∆T
T
V
LHD
j
STG
LHD
ESD
j
min.
-0.3
-1.0
Limit Values
-40
-55
-4
-2
–
max.
150
150
5.7
1.0
60
4
2
Electrical Characteristics
SPOC - BTS5590G
Unit
V
mA
°C
K
°C
kV
Rev. 1.3, 2007-10-30
Conditions
–
t ≤ 2 min
–
–
–
HBM
–
–
6)