CRS1 ETC-unknow, CRS1 Datasheet - Page 8

• Manufacturer Part Number: CRS1
• Description: An Analog Touch Panel Controller Chip Through Serial Crs1-656 ,ps/2 Crs1-685
• Manufacturer: ETC-unknow

Command
CTRL-Q
CTRL-S
A. AHL Mode (Gunze original Mode)
XH
YH
BR
VE
CR
XL
YL
RE
(4) List of Commands
SR
LF
DI
Stop sending transmission. Commands can be received while running.
Make data delimiter CR (0D
Reset
Note: If the controller receives the command while sending data, the data may be affected.
Diagnose the controller board. If normal, it returns Pass $$$$.
* $ stands for space.
* While in data transmission, the transmission stops from the next data.
Resume sending transmission
(Same as "SR")
(Same as "SR")
Return software version "V1.0$$"
* $ stands for space.
Make data delimiter CR (0D
Return X-Low reference data (calibration data) <e g.> "0012"
*Reference Data are the data of an electrode voltage of the touch panel. The X-Low
Return X-High reference data (calibration data) <e g.> "1002"
Return Y-Low reference data (calibration data)
Return Y-High reference data (calibration data)
Reference Data are the data expressing an electrode voltage of the lower potential when
the panel in X direction is electrically impressed.
H
H
) and LF (0A
)
SPEC 8.2.00
H
Actuation
)
8