D4SL-NSK10-LKx Omron, D4SL-NSK10-LKx Datasheet - Page 23

• Manufacturer Part Number: D4SL-NSK10-LKx
• Description: Guard Lock Safety-door Switch
• Manufacturer: Omron

D4SL-NSK10-LK@
• Do not drop the Product. Doing so may prevent the Product from
• Mount the Product securely to prevent it from falling. Otherwise,
• Do not attempt to disassemble or modify the Switch. Doing so may
• Make sure that the gap between the shot bolt and the guide is ±0.5
• To ensure safety, do not operate the Switch with anything other
• Your hand may be injured by being pinched between the Operation
• Be careful to avoid pinching your hand when operating the Slide
• Do not impose a force of exceeding 1 N•m when operating the
• Do not force the slide handle to move when the lockout key is not
• Do not force the slide handle to move when the door is locked.
• Do not close the door with the shot bolt removed. Doing so may
• Turn the Lockout Key to the "SLIDE LOCK" position and remove it
• The durability of the Switch varies considerably depending on the
• The user must not maintain or repair equipment incorporating the
• Refer to the D4SL-N Guard Lock Safety-door Switch Instruction
• Do not apply excessive force in the direction of the slide. This may
• Do not force the switch or cable. This may
functioning to full capacity.
injury may occur.
cause the Switch to malfunction.
mm.
Otherwise, excessive wear or damage may cause malfunction.
than the Slide Key Unit.
Key and Switch when closing the door with your hand on the
Product.
Handle.
Lockout Key.
Otherwise, the Product may be damaged and may not operate
properly.
To prevent damage, attach the supplied labels for display near the
Product.
inserted. Doing so may damage the product and make operation
impossible.
Doing so may damage the product and make operation impossible.
damage the product and make operation impossible.
when opening the door to prevent a third party from operating the
Slide Handle.
switching conditions. Always confirm the usage conditions by using
the Switch in an actual application, and use the Switch only for the
number of switching operations given in the performance
specifications.
Switch. Contact the manufacturer of the equipment for any
maintenance or repairs required.
Sheet about storage conditions, ambient conditions,
Switch details, and handling methods.
damage the product and cause it to malfunction.
damage the product. The cable should be fixed at
a point separate from the switch.
SLIDE
LOCK
FREE
SLIDE
www.DataSheet.co.kr
D4SL-N
Solenoid Lock Models
Release Key
Mounting Covers
Front
D4SL-N@@@@-@
Back
D4SL-N@@@@-@
• Be sure to supply power to the solenoid after the door is closed
• The solenoid lock locks the door only when power is supplied to the
• The release key is used to unlock the Switch in case of emergency
• If the release key setting is changed from LOCK to UNLOCK, the
• After setting the release key to UNLOCK to, for example, perform
• The release key is set in the unlock position at the factory for the
• In the unlock position, even when the door of large machines or
• Do not use the release key to start or stop machines.
• The auxiliary lock must be released only by authorized personnel.
• Do not impose a force exceeding 0.2 N•m on the release key
• To prevent the release key from being used by unauthorized
• Confirm that the seal rubber has no defects before use. If the seal
UNLOCK
LOCK
(after the Operation Key is inserted).
solenoid. Therefore, the door will be unlocked if the power supply
to the solenoid stops. Therefore, do not use solenoid lock models
for machines that may be operating and dangerous even after the
machine stops operating.
or if the power supply to the Switch stops.
lock will be released and the safety door can be opened
(mechanical lock models only).
maintenance, be sure to return it to LOCK setting before resuming
operation.
D4SL-N@@@A and to the lock position for the D4SL-N@@@G.
stamping machines is closed during preliminary adjustment, the
door will remain unlocked and the machines will not be activated.
screws. The release key may be damaged and may not operate
properly.
personnel, set it to LOCK and seal it with sealing wax.
rubber is displaced or raised, or has foreign particles adhered to it,
the sealing capability of the seal rubber will be adversely affected.
LOCK
UNLOCK
Precautions for Correct Use
D4SL-N / D4SL-NSK10-LK@
D4SL-N@@@@-@4
D4SL-N@@@@-@4
UNLOCK
LOCK
LOCK
UNLOCK
Å@
23
Datasheet pdf - http://www.DataSheet4U.net/