RL1024P Perkin Elmer Optoelectronics, RL1024P Datasheet - Page 42

• Manufacturer Part Number: RL1024P
• Manufacturer: Perkin Elmer Optoelectronics

40
tdi imagers
www.optoelectronics.perkinelmer.com
PT1109AAQ-711 Features
• 1024 pixel x 96 stage
• Unidirectional operation
• 20 MHz data rate
• High dynamic range (4300:1)
• Line rates to 19 kHz
• Quantum efficiency of 42%
• 13 µm x 13 µm pixel size
• >0.99995 horizontal, >0.9999
PT1225AAQ-711 Features
• 2048 pixel x 256 stage
• 64 outputs
• 8 MHz data rate per output
• Unidirectional operation
• High dynamic range of over 66 dB
• Line rates to 256 kHz
• 27 µm x 27 µm pixel size
• >0.99995 horizontal, >0.9999
Typical Applications
• Semiconductor Inspection
• Wafer Inspection
• Sorting Applications
Datasheets available upon request
at 700 nm
vertical CTE at maximum
saturation exposure
vertical CTE at maximum
saturation exposure
Description
The PT1109AAQ and PT1225AAQ Time Delay Integration (TDI)
imagers combine the best features of photodiode array detection
and TDI operation to offer an uncompromising solution to the
increasing demands of high-speed imaging applications.
PT 1109AAQ
The PT1109AAQ is a high-performance TDI imager featuring a
unique 13 µm x 13 µm-square TDI pixel architecture. The chip
has 96 stages with 1024 pixels per stage, allowing for stable imag-
ing in both fast and low-light applications. Eight extra stages are
present at the front end of the sensor, allowing for adequate dark
balancing. Full-well capacity of the sensor is 390,000 electrons,
and readout noise (rms) is <90 electrons, allowing for a >4300:1
dynamic range.
PT1225AAQ
The PT1225AAQ is a high-performance TDI imager featuring a
unique 27 µm x 27 µm-square TDI pixel architecture. The chip
has 256 stages with 2048 pixels per stage, allowing for stable
imaging in both fast and low-light applications. Full-well capaci-
ty of the sensor is 700,000 electrons, and readout noise (rms) is
<350 electrons, allowing for a dynamic range of over 66 dB.
Table of Contents