LPC2114 Philips Semiconductors (Acquired by NXP), LPC2114 Datasheet - Page 10

• Manufacturer Part Number: LPC2114
• Description: Single-chip 16/32-bit Microcontrollers; 128/256 KB Isp/iap Flash With 10-bit ADCthe LPC2114/LPC2124 Are Based on a 16/32 Bit ARM7TDMI-STM Cpu With Real-time Emulation And Embedded Trace Support, Together With 128/256 Kilobytes (kB) of Embedded High S
• Manufacturer: Philips Semiconductors (Acquired by NXP)

Philips Semiconductors
9397 750 12805
Preliminary data
6.4 Memory map
6.5 Interrupt controller
The LPC2114/LPC2124 memory maps incorporate several distinct regions, as shown
in the following figures.
In addition, the CPU interrupt vectors may be re-mapped to allow them to reside in
either Flash memory (the default) or on-chip static RAM. This is described in
6.19 “System
The Vectored Interrupt Controller (VIC) accepts all of the interrupt request inputs and
categorizes them as FIQ, vectored IRQ, and non-vectored IRQ as defined by
programmable settings. The programmable assignment scheme means that priorities
of interrupts from the various peripherals can be dynamically assigned and adjusted.
Fig 3. LPC2114/LPC2124 memory map.
3.75 GB
4.0 GB
3.5 GB
3.0 GB
2.0 GB
1.0 GB
0.0 GB
control”.
Rev. 02 — 02 February 2004
256 KBYTE ON-CHIP FLASH MEMORY (LPC2124)
128 KBYTE ON-CHIP FLASH MEMORY (LPC2114)
BOOT BLOCK (RE-MAPPED FROM
16 KBYTE ON-CHIP STATIC RAM
RESERVED ADDRESS SPACE
RESERVED ADDRESS SPACE
RESERVED ADDRESS SPACE
ON-CHIP FLASH MEMORY
AHB PERIPHERALS
VPB PERIPHERALS
Single-chip 16/32-bit microcontrollers
LPC2114/LPC2124
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
002aaa661
0xFFFF FFFF
0xF000 0000
0xEFFF FFFF
0xE000 0000
0xDFFF FFFF
0xC000 0000
0x8000 0000
0x7FFF FFFF
0x7FFF E000
0x7FFF DFFF
0x4004 0000
0x4000 3FFF
0x4000 0000
0x3FFF FFFF
0x0004 0000
0x0003 FFFF
0x0002 0000
0x0001 FFFF
0x0000 0000
Section
10 of 33