ADAM-4571S ETC, ADAM-4571S Datasheet - Page 40

• Manufacturer Part Number: ADAM-4571S
• Description: (ADAM-4570 / ADAM-4571) User Manual
• Manufacturer: ETC

www.DataSheet4U.com
30
3.1 Driver and Utility Installation
In order to use a PC via an Ethernet network to control serial
devices connected to the EDG Series, you must first have a host
running Windows 95/98/NT/2000/ME/XP. This type of appli-
cation also requires the host to have an Ethernet card and TCP/
IP protocol installed. Following are the installation instructions
to set up the EDG Series.
1. Insert the Advantech industrial communication CD-ROM into
2. Use your Windows Explorer or the Windows Run command
3. The Setup program will specify a default installation path,
4. Use your Windows Explorer or the Windows Run command
5. After setup has copied all program files to your computer,
6. The configuration utility will search for the EDG Series devic-
Advantech EDG series User’s Manual
the drive (e.g. D:\) on the host PC. Change the host comput-
er’s default drive from C: to D:
to execute the Setup program (the path for the Setup program
on the CD-ROM should be D:\ADAM4570\utility&driver\
portmaputility1.01\setup.exe, if your default floppy drive is D:).
C:\Program Files\Advantech\EDG COMport\1, 2 and 4
ports Mapping utility. If a new destination path is necessary,
just click the Browse button to change to another path. After
you have specified the installation path, click the Next button.
to execute the Setup program.the path for the Setup program
on the CD-ROM should be D:\ADAM-4570\utility&driver\
configutility1.01\setup.exe, if your default floppy drive is D:).
Use the same way to execute the Setup program. The default
path is C:\Program Files\Advantech\EDG COMport\1, 2
and 4 Configuration utility.
click the Finish button to finish the installation.
es on your local network.