ADAM-4571S ETC, ADAM-4571S Datasheet - Page 56

• Manufacturer Part Number: ADAM-4571S
• Description: (ADAM-4570 / ADAM-4571) User Manual
• Manufacturer: ETC

The steps of password setting are the same as introduced in the
previous section. Remember that user-defined password set in
the configuration utility should be consistent with that set in the
port mapping utility. That means if you choose TDES encryption
without defining a password in the configuration utility, you have
to choose TDES encryption here as well and leave "Input Pass-
word" blank; else the security communication with ADAM-
4570S/4571S will fail.
3.4.2 Self Test Function
The purpose of this test is to make sure the communication from
host PC to ADAM -4570 is OK. If there is still an error, you
can check the communication from the EDG Series to the serial
devices.
If the test is selected, an external test will be done to check that
the connection signals for each port are working properly. For
the test, you will need to connect each port to a loopback tester
(provided in the package). Refer to the following chart for the
specifications of this loopback tester. The loopback test only
applies to RS-232 mode. The test is divided into two parts:
www.DataSheet4U.com
Signal test and Communication Parameters test.
46
Advantech EDG series User’s Manual