CM12RA02 Taiyo Yuden Co., Ltd, CM12RA02 Datasheet - Page 6

• Manufacturer Part Number: CM12RA02
• Description: Common Mode Choke Coils For Dc And Signal Lines Leaded Type
• Manufacturer: Taiyo Yuden Co., Ltd

【Test method and remarks】
【Test method and remarks】
【Test method and remarks】
【Test method and remarks】
【Test method and remarks】
【Test method and remarks】
【Test method and remarks】
■
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
co0304_reli_e-01
CM-RA/BU-RA Type
CM-RB Type
TLF9U, TLF14CB
CM-RA/BU-RA Type
CM-RB Type
TLF9U, TLF14CB
CM-RA/BU-RA Type
CM-RB Type
TLF9U, TLF14CB
CM-RA/BU-RA Type
CM-RB Type
TLF9U, TLF14CB
CM-RA/BU-RA Type
CM-RB Type
TLF9U, TLF14CB
CM-RA/BU-RA Type
CM-RB Type
TLF9U, TLF14CB
CM-RA/BU-RA Type
CM-RB Type
TLF9U, TLF14CB
9. Insulation resistance between wire and core
10. Withstanding : between wires
11. Withstanding : between wires and core
12. Rated voltage
13. Resistance to vibration
14. Solderability
15. Resistance to soldering heat
TLF : Applied voltage : 500VDC (TLF9UA, 14CB)
CM・ TLF : Applied voltage : 250VDC (CM-RA/BU-RA, CM-RB）
TLF :
TLF9UA, 14CB
TLF9UB
CM・ TLF : According to JIS C 0040
CM :
TLF :
CM :
TLF :
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
RELIABILITY DATA
Direction
Frequency range : 10 to 55 to 10Hz (1 min.)
Amplitude
Mounting method : soldering onto PC board
Recovery
Duration : 60 sec.
Applied voltage : 2000VAC (TLF9UA, 14CB)
Duration
Solder temperature : 235±5℃
Duration
Immersion depth
Solder temperature : 230±5℃
Duration
Immersion depth
Solder temperature : 260±5℃
Duration
Immersion depth
Recovery
Solder temperature : 260±5℃
Duration
Immersion depth
Recovery
Duration : 60sec.
: 2 to 24 hrs of recovery under the standard condition after the test. (CM-RB)
: 2hrs each in X, Y and Z direction
: 1.5mm (shall not exceed acceleration 196m/s
: At least 1hr of recovery under the standard condition after the removal from test chamber, followed by the measurement within 2hrs. (TLF9U, 14CB)
: 250VAC
: 50VDC
: 250VDC (TLF9UB)
: 500VDC (TLF9UB)
: 60sec.
: 2000VAC (TLF9UA, 14CB）
: 500VDC (TLF9UB)
: 5±0.5sec.
: Up to 2∼2.5mm from terminal root.
: 1 to 2 hrs of recovery under the standard condition after the test.
: 10±1sec. (9U, 14CB)
: Up to 1.0 to 1.5mm from PBC mounted level.
: At least 1hr of recovery under the standard condition after the removal from test chamber, followed by the measurement within 2hrs.
: 2±0.5sec.
: According to detailed specification.
: 2±0.5sec. (9U)
: 3±0.5sec. (14CB)
: Up to 1.0 to 1.5mm from PBC mounted level.
100MΩ min.
No abnormality
No abnormality
Within the specified range
Appearance : No abnormality
TLF9U : Inductance change : Within ±5％
At least 75% of terminal electrode is covered by new solder.
Solder shall be uniformly adhered onto immersed surfaces.
Appearance : No abnormality
TLF9UA : Inductance change : Within ±5%
Total : 6hrs
2
)
Inductance change : Within ±15%
TLF14CB : Within the specified range
Inductance change : Refer to individual specification
TLF14CB : Within the specified range
1
co0304_reli-RP2