AN1177 STMicroelectronics, AN1177 Datasheet - Page 8

• Manufacturer Part Number: AN1177
• Description: P51XA-PSD8XX DESIGN GUIDE
• Manufacturer: STMicroelectronics

AN1177 - APPLICATION NOTE
Now you have your project established based on a PSD813F2 and a P51XA. However, there are many
other MCU/MPUs you could have chosen in place of the P51XA and still have use of this document. Click
OK and the “Design Parameters” window will appear.
Design Parameters. Choose “Use Design Assistant” and click OK to be taken to the Pin Definitions
screen. Notice how all the pins functions on the left hand side of the diagram have been assigned for you
based on your MCU and PSD selection and configuration. To get an idea of how to add a pin function,
click on pc3 in the diagram, then “Dedicated JTAG – TSTAT” in the “Other” box and click the Add button.
Your screen should match the one below. Continue to add pin functions to match your design. When fin-
ished, click Next >> to be taken to the “Design Assistant” screen. Note: there are detailed instructions on
how to use this screen and other “Design Assistant” screens in the PSDsoft Express User Manual .
8/26