M201P1-L03 CHI MEI, M201P1-L03 Datasheet - Page 24

• Manufacturer Part Number: M201P1-L03
• Description: LCD Module
• Manufacturer: CHI MEI

9. PRECAUTIONS
9.1 ASSEMBLY AND HANDLING PRECAUTIONS
9.2 SAFETY PRECAUTIONS
(10) When ambient temperature is lower than 10ºC may reduce the display quality. For example, the
(1) Do not apply rough force such as bending or twisting to the module during assembly.
(2) To assemble or install module into user’s system can be only in clean working areas. The dust and oil
(3) It’s not permitted to have pressure or impulse on the module because the LCD panel and Backlight will
(4) Always follow the correct power sequence when LCD module is connecting and operating. This can
(5) Do not pull the I/F connector in or out while the module is operating.
(6) Do not disassemble the module.
(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and
(8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage
(9) High temperature or humidity may reduce the performance of module. Please store LCD module within
(1) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while
(2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In
(3) After the module’s end of life, it is not harmful in case of normal operation and storage.
may cause electrical short or worsen the polarizer.
be damaged.
prevent damage to the CMOS LSI chips during latch-up.
easily scratched.
LCD module when it is operating.
the specified storage conditions.
response time will become slowly, and the starting voltage of CCFL will be higher than room
temperature.
assembling with inverter. Do not disassemble the module or insert anything into the Backlight unit.
case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.
24 / 26
Issued Date: Aug. 30, 2006
Model No.: M201P1-L03
DOC No.:
Approval
Version 2.0