LM3S1538 Luminary Micro, Inc, LM3S1538 Datasheet - Page 444

• Manufacturer Part Number: LM3S1538
• Description: Lm3s1538 Arm Microcontroller
• Manufacturer: Luminary Micro, Inc

Signal Tables
444
Pin Number
C10
C11
C12
D10
D11
D12
E10
E12
E11
C4
C5
C6
C7
C8
C9
D1
D2
D3
E1
E2
E3
Pin Name
I2C0SCL
I2C0SDA
VDD25
VDD33
CMOD0
VDDA
VDDA
CCP7
CCP6
CCP2
CCP0
GND
GND
PH1
PH0
PB2
PB3
PH2
PB1
LDO
PB0
NC
NC
NC
NC
NC
NC
Preliminary
Pin Type
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
-
-
-
-
-
-
-
-
-
-
-
-
-
Buffer Type
Power
Power
Power
Power
Power
Power
Power
TTL
TTL
TTL
TTL
TTL
TTL
TTL
TTL
TTL
TTL
TTL
TTL
OD
OD
-
-
-
-
-
-
Description
Ground reference for logic and I/O pins.
Ground reference for logic and I/O pins.
The positive supply (3.3 V) for the analog
circuits (ADC, Analog Comparators, etc.).
These are separated from VDD to minimize
the electrical noise contained on VDD from
affecting the analog functions.
The positive supply (3.3 V) for the analog
circuits (ADC, Analog Comparators, etc.).
These are separated from VDD to minimize
the electrical noise contained on VDD from
affecting the analog functions.
GPIO port H bit 1
Capture/Compare/PWM 7
GPIO port H bit 0
Capture/Compare/PWM 6
No connect. Leave the pin electrically
unconnected/isolated.
GPIO port B bit 2
I2C module 0 clock
GPIO port B bit 3
I2C module 0 data
No connect. Leave the pin electrically
unconnected/isolated.
No connect. Leave the pin electrically
unconnected/isolated.
Positive supply for most of the logic function,
including the processor core and most
peripherals.
No connect. Leave the pin electrically
unconnected/isolated.
GPIO port H bit 2
GPIO port B bit 1
Capture/Compare/PWM 2
No connect. Leave the pin electrically
unconnected/isolated.
No connect. Leave the pin electrically
unconnected/isolated.
Low drop-out regulator output voltage. This
pin requires an external capacitor between
the pin and GND of 1 µF or greater. The LDO
pin must also be connected to the VDD25 pins
at the board level in addition to the decoupling
capacitor(s).
Positive supply for I/O and some logic.
CPU Mode bit 0. Input must be set to logic 0
(grounded); other encodings reserved.
GPIO port B bit 0
Capture/Compare/PWM 0
July 26, 2008