SB2A-16A Qlogic Corporation, SB2A-16A Datasheet - Page 134

• Manufacturer Part Number: SB2A-16A
• Description: Development Tools, SANbox 16-port Switch
• Manufacturer: Qlogic Corporation

B – Command Line Interface
Set Config Command
Examples
B-36
The following is an example of the Set Config Port command:
SANbox2 #> admin start
SANbox2 (admin) #> config edit
SANbox2 (admin-config) #> set config port 1
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Configuring Port Number:
------------------------
AdminState
LinkSpeed
PortType
ISLSecurity
SymPortName
ALFairness
DeviceScanEnable (True / False)
ForceOfflineRSCN (True / False)
ARB_FF
InteropCredit (decimal value, 0-255)
ExtCredit
FANEnable
LCFEnable
MFSEnable
MSEnable
NoClose
IOStreamGuard (Enable / Disable)
VIEnable
CheckAlps
Finished configuring attributes.
This configuration must be saved (see config save command) and
activated (see config activate command) before it can take effect.
To discard this configuration use the config cancel command.
(1=Online, 2=Offline, 3=Diagnostics, 4=Down)
(1=1Gb/s, 2=2Gb/s, 3=Auto)
(TL / GL / G / F / FL / Donor)
(Any /
(string, max=32 chars)
(True / False)
(True / False)
(dec value, increments of 11, non-loop only)
(True / False)
(True / False)
(True / False)
(True / False)
(True / False)
(True / False)
(True / False)
Ours / None)
1
[Online]
[Auto
[GL
[Any
[Port2 ]
[False ]
[True
[False
[False ]
[0
[0
[True
[False ]
[False ]
[True
[False ]
[Disable]
[False ]
[False ]
59021-06 A
]
]
]
]
]
]
]
]
]