R15-600-RNLD Norgren, R15-600-RNLD Datasheet - Page 21

• Manufacturer Part Number: R15-600-RNLD
• Description: Olympian Filter
• Manufacturer: Norgren

Use Micro-Fog models in applications with one or more points of
lubrication.
Use Oil-Fog models to lubricate a single tool, cylinder or other air
driven device.
Use Fixed Venturi for high flow general purpose applications.
Technical Data
Fluid: Compressed air
Maximum pressure: 17 bar (250 psig)
Operating temperature*: -20° to +80°C (0° to +175°F)
* Air supply must be dry enough to avoid ice formation at temperatures below +2°C
(+35°F).
Start point (i.e. minimum flow required for lubricator operation) at
Typical flow at 6,3 bar (90 psig) inlet pressure and 0,5 bar
Nominal bowl sizes:
Recommended lubricants: See page N/AL.8.900.935
Materials:
7/97
Olympian plug-in design
Built in flow sensor gives almost consistant oil/air
ratio over a wide range of flows
0,5 and 1 litre (1 pint and 1 quart US) models can be
filled under pressure
Simple and accurate drip rate adjustment, snap
action lock
Ideal for general lubrication applications
6,3 bar (90 psig) inlet pressure:
Micro-Fog: 6 dm
Oil-Fog: 6 dm
Fixed venturi: 52 dm
(7 psig) pressure drop:
Micro-Fog and Oil-Fog: 175 dm
Fixed venturi: 400 dm
0,5 litre (1 pint US)
1 litre (1 quart US)
8 litre (2 gallons US)
20 litre (5 gallons US)
Body: Aluminium
Yoke: Aluminium
Bowl, 0,5 litre (1 pint US) and 1 litre (1 quart US): Aluminium
Bowl sight glass: Pyrex
Reservoirs, 8 litre (2 gallons US) and 20 litre (5 gallons US):
Reservoir sight tube: Polythene
Elastomers: Synthetic rubber
Steel
3
/s (13 scfm)
3
/s (13 scfm)
3
/s (110 scfm)
3
/s (848 scfm)
We reserve the right to amend, without notice, the specifications given in this document.
3
/s (370 scfm)
Our policy is one of continuous research and development.
Ordering Information
See Ordering Information on the following
pages.
ISO Symbol
Micro-Fog and Oil-Fog Lubricator
3/4 " , 1, 1 1/4 " , 1 1/2 " Port Sizes
N/AL.8.261.400.01
Olympian
L15