bsv-1.5s12r0h XP Power Limited, bsv-1.5s12r0h Datasheet - Page 10

• Manufacturer Part Number: bsv-1.5s12r0h
• Description: Pol Dc-dc Converter
• Manufacturer: XP Power Limited

11. Soldering Conditions
12. Vibration and shock test
Bellnix DC-DC CONVERTERS
11-1. Reflow method
11-2. About storage before being mounted
Storage conditions before being mounted should be 30°C/ 60% RH or below.
Please conduct by the condition as below regarding the soldering temperature and time and storage before mounting,
Pre-heating temp.: 150-180°C, within 60 sec max. (Refer to the figure below)
Peak heating temp.: 250°C max.
Reflow: twice
After mounting, it depends on the environmental condition.
Note 1. Do not give shock at reflow because components which compose the converter may move.
Note 2. After mounting the converter on PCB, pleae do not refrow again turning the PCB over.
Vibration : 5~10 Hz All amplitudes 10mm, 10~55Hz Acceleration 2G (Three direction, for one hour each)
Shock
2.3℃/sec. max.
Temp. regulation point is the
component surface temp.
: Acceleration 20G (Three direction, three times each)
Shocking time 11 ±5ms
180℃
150℃
220°C or more, within 60 sec max.
60sec. max.
2℃/sec. max.
60sec. max.
High-Speed Response, Output Set Accuracy±1%
Peak:250℃ max.
220℃
1 to 4℃/sec.
Time
POL DC-DC Converter
BDD20080825
BSV-H Series
10